RQ
TX00
64
11
Si
mp
le
S
etu
p
∫
[PT1050]
Before using your wireless subwoofer
Perform the pairing procedure below to use your wireless subwoofer.
Preparation
≥
Ensure all connections are completed.
≥
Turn on the main unit and reduce the volume.
1
Turn on your wireless subwoofer.
2
While pressing [
5
/
9
] on the main unit, press the numbered button [3] on the remote control until “P” lights in the main unit’s display.
3
While “P” is displayed, press [I/D SET].
4
While pressing [
5
/
9
] on the main unit, press the numbered button [3] on the remote control.
≥
“
[WS]
” lights on the main unit’s display.
5
Turn the wireless subwoofer off and on again.
≥
Make sure its indicator lights up green.
Do not:
≥
mix old and new batteries.
≥
use different types at the same time.
≥
heat or expose to flame.
≥
take apart or short circuit.
≥
attempt to recharge alkaline or manganese batteries.
≥
use batteries if the covering has been peeled off.
Mishandling of batteries can cause electrolyte leakage which can
severely damage the remote control.
Remove the batteries if the remote control is not going to be used for a
long period of time. Store in a cool, dark place.
∫
Use
Aim at the remote control signal sensor (
➜
page 13), avoiding
obstacles, at a maximum range of 7 m (23 feet) directly in front of
the unit.
The QUICK SETUP screen assists you to make necessary settings.
To display the picture from the main unit,
turn on your television and change its video
input mode (e.g. VIDEO 1, AV 1, etc.).
≥
To change your television’s video input mode,
refer to its operating instructions.
≥
This remote control can perform some basic
television operations (
➜
page 12).
To change these settings later
Select “QUICK SETUP” in the “Others” menu (
➜
page 27).
I/D SET
I/D SET
Use a pointed object.
Wireless subwoofer
step
7
Preparing the remote control
R6/LR6, AA
Insert so the poles (
i
and
j
) match those in the remote control.
≥
Do not use rechargeable type batteries.
Press in and lift up.
Replace the cover.
∫
Batteries
step
8
Performing QUICK SETUP
AUTO
, , ,
ENTER
SETUP
DVD
RETURN
1
Turn on the unit.
2
Select “DVD/CD”.
3
Show the QUICK SETUP
screen.
4
Follow the messages
and make the settings.
≥
Menu Language
≥
TV Type
≥
TV Aspect
5
Press to finish QUICK
SETUP.
6
Press to exit.
D
V
D
SETUP
Setup
ENTER
RETURN
to select and press
to return
QUICK SETUP
Select the menu lan
g
ua
g
e.
En
g
lish
Select
Register
RETURN
ENTER
SETUP
Pr
ep
a
ri
ng
th
e
re
m
ot
e
co
ntr
o
l /
P
e
rf
o
rm
ing
Q
U
IC
K
SET
U
P
0064 En_p03-15.fm Page 11 Wednesday, March 28, 2007 8:49 AM
