background image

3

RQT7923

IMPORTANT SAFETY INSTRUCTIONS

1)  Read these instructions.
2)  Keep these instructions.
3)  Heed all warnings.
4)  Follow all instructions.
5)  Do not use this apparatus near water.
6)  Clean only with dry cloth.
7)  Do not block any ventilation openings. Install in accordance 

with the manufacturer’s instructions.

8)  Do not install near any heat sources such as radiators, heat 

registers, stoves, or other apparatus (including amplifiers) 
that produce heat.

9)  Do not defeat the safety purpose of the polarized or 

grounding-type plug. A polarized plug has two blades with 
one wider than the other. A grounding-type plug has two 
blades and a third grounding prong. The wide blade or the 
third prong are provided for your safety. If the provided 
plug does not fit into your outlet, consult an electrician for 
replacement of the obsolete outlet.

Read these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the applicable safety 
instructions listed below. Keep these operating instructions handy for future reference.

10)  Protect the power cord from being walked on or pinched 

particularly at plugs, convenience receptacles, and the point 
where they exit from the apparatus.

11)  Only use at tachments /accessories specified by the

manufacturer.

12)  Use only with the cart, stand, tripod, bracket, 

or table specified by the manufacturer, or 
sold with the apparatus. When a cart is used, 
use caution when moving the cart/apparatus 
combination to avoid injury from tip-over.

13)  Unplug this apparatus during lightning storms or when 

unused for long periods of time.

14)  Refer all servicing to qualified service personnel. Servicing 

is required when the apparatus has been damaged in any 
way,  such  as  power-supply  cord  or  plug  is  damaged,  liquid 
has been spilled or objects have fallen into the apparatus, 
the apparatus has been exposed to rain or moisture, does 
not operate normally, or has been dropped.

Listening caution

EST. 1924

Selecting fi ne audio equipment such as the unit you’ve just 
purchased is only the start of your musical enjoyment. Now it’s 
time to consider how you can maximize the fun and excitement 
your equipment offers. This manufacturer and the Electronic 
Industries Association’s Consumer Electronics Group want you to 
get the most out of your equipment by playing it at a safe level. One 
that lets the sound come through loud and clear without annoying 
blaring or distortion—and, most importantly, without affecting your 
sensitive hearing.

We recommend that you avoid prolonged exposure to excessive 
noise.

Sound can be deceiving. Over time your hearing “comfort level” 
adapts to higher volumes of sound. So what sounds “normal” can 
actually be loud and harmful to your hearing.
Guard against this by setting your equipment at a safe level 
BEFORE your hearing adapts.
To establish a safe level:
•  Start your volume control at a low setting.
•  Slowly increase the sound until you can hear it comfortably and 

clearly, and without distortion.

Once you have established a comfortable sound level:
•  Set the dial and leave it there.

Taking a minute to do this now will help to prevent hearing damage 
or loss in the future. After all, we want you listening for a lifetime.

Product Service

1. Damage requiring service 

—The unit should be serviced by 

qualifi ed service personnel if:
(a) The AC power supply cord or the plug has been damaged; or
(b) Objects or liquids have gotten into the unit; or
(c) The unit has been exposed to rain; or
(d) The unit does not operate normally or exhibits a marked 

change in performance; or

(e) The unit has been dropped or the cabinet damaged.

2. Servicing

—Do not attempt to service the unit beyond that 

described in these operating instructions. Refer all other servicing 
to authorized servicing personnel.

3. Replacement  parts

—When parts need replacing ensure the 

servicer uses parts specifi ed by the manufacturer or parts that 
have the same characteristics as the original parts. Unauthorized 
substitutes may result in fi re, electric shock, or other hazards.

4. Safety  check

—After repairs or service, ask the servicer to 

perform safety checks to confi rm that the unit is in proper working 
condition.

Product information

For product information or assistance with product operation:

In the U.S.A.

, refer to “Customer Services Directory” on page 15.

In Canada,

 contact the Panasonic Canada Inc. Customer Care 

Centre at 905-624-5505, or visit the website (www.panasonic.ca), 
or an authorized Servicentre closest to you.

Supplied accessories

Please check and identify the supplied accessories.
Use numbers indicated in parentheses when asking for replacement parts. (As of January 2005)

In U.S.A. to order accessories, refer to “Accessory Purchases” on page 15.

1 x Remote control 

(N2QAJB000132)

1 x FM indoor

 antenna

(RSA0007-L)

2 x Remote control 

batteries 

1 x AC power supply

cord

(K2CB2CB00006)

1 x AM loop antenna

(N1DAAAA00001)

PM31_7923-3P.indd   3

PM31_7923-3P.indd   3

2/18/05   3:24:53 PM

2/18/05   3:24:53 PM

Summary of Contents for SCPM313 - CD MICRO SYSTEM

















Reviews: