VQ
T
5A
8
9
EN
G
LI
S
H
7
Preparation
While charging this unit or after charging this unit, turn on the Bluetooth
®
feature of
the device and place the device near this unit.
If you intend to use an NFC (Near Field Communication)-compatible Bluetooth
®
device, proceed to
“
One-Touch Connection (Connecting by NFC)” (
>
8).
For each Bluetooth
®
device you want to connect to via Bluetooth
®
, perform pairing
first.
∫
Pairing with Bluetooth
®
device
1
Press [
Í
/I] to turn this unit on.
• The Bluetooth
®
indicator (blue) blinks slowly.
• If this unit is being used for the first time (factory preset state):
The Bluetooth
®
indicator (blue) blinks fast.
→
The unit will enter pairing standby.
→
Skip to step 3.
2
Press and hold [
] until the Bluetooth
®
indicator (blue) blinks
fast.
• The unit will enter pairing standby.
3
Select “SC-NT10” from the Bluetooth
®
device’s Bluetooth
®
menu.
• When the Bluetooth
®
device is paired and connected,
the Bluetooth
®
indicator (blue)
on the unit lights up.
• If prompted for a passkey, input “0000”.
• If the Bluetooth
®
device need to operate the Bluetooth
®
pairing setting and the
Bluetooth
®
connecting setting, operate both settings.
4
Start playing back music, a movie, etc. on your Bluetooth
®
device.
• Adjust the volume using the [VOL -/VOL +] buttons on the unit.
When the maximum or minimum volume is reached, you will be notified by a beep
sound.
∫
Listening to audio from a paired device
When this unit is turned on, the Bluetooth
®
indicator (blue) will blink slowly indicating
that the unit is in connection standby mode. Please perform Steps 3 and 4.
• When the power is turned on, this unit is connected to the last-used Bluetooth
®
device. At this
point, please perform Step 4.
Listening to audio from a Bluetooth
®
device
Connecting via Bluetooth
®
menu
7
SC-NT10_VQT5A89.book 7 ページ ２０１３年７月８日 月曜日 午前１０時３分
