15
Operating Instructions
Specifications
Dimensions (W
k
H
k
D):
(Without wall mount bracket)
800 mm
k
108 mm
k
58 mm
(With wall mount bracket)
800 mm
k
108 mm
k
80 mm
Mass:
(Without wall mount bracket)
Approx. 3.2 k
g
(With wall mount bracket)
Approx. 3.3 k
g
Operating temperature range:
0
o
C to
r
40
o
C
Operating humidity range:
20 % to 80 % RH (no condensation)
RMS Output Power
Front ch:
30 W per channel (4
≠
), 1 kHz, 10 % THD
Subwoofer ch:
30 W per channel (4
≠
), 100 Hz, 10 % THD
Total RMS Dolby Digital mode power:
120 W
FRONT SPEAKERS (BUILT-IN)
Type:
1 way, 1 speaker system (Bass Reflex)
Full range:
6.5 cm Cone type
k
2
SUBWOOFER (BUILT-IN)
Type:
1 way, 1 speaker system (Bass Reflex)
k
2
Woofer:
8 cm Cone type
k
2
HDMI
This unit supports “HDAVI Control 5” function.
HDMI input
Input connector:
Type A (19 pin)
HDMI AV output
Output connector:
Type A (19 pin)
Digital Audio Input (TV only)
Optical digital input:
Optical terminal
Sampling frequency:
32 kHz, 44.1 kHz, 48 kHz
Audio Format:
LPCM, Dolby Digital
IR Blaster
Terminal 1:
3.5 mm jack
1 Specifications are subject to change without notice.
Mass and dimensions are approximate.
2 Total harmonic distortion is measured by a digital
spectrum analyzer.
Audio information
∫
Compatible audio formats
This unit is compatible with the following
formats:
Dolby Digital, DTS Digital Surround,
2-channel LPCM and multi-channel LPCM.
≥
When using the optical digital audio cable, this
system is not able to play audio with a
sampling frequency greater than 48 kHz.
(Sound Effect and Dolby Virtual Speaker will
be automatically cancelled if the audio signal’s
sampling frequency is greater than 48 kHz.)
GENERAL
Power consumption:
30 W
Power consumption in standby mode:
Approx. 0.2 W
Power supply:
AC 220 V to 240 V, 50 Hz
AMPLIFIER SECTION
SPEAKER SECTION
TERMINAL SECTION
SCHTB10EB_RQTX1166-B.book Page 15 Thursday, June 10, 2010 3:06 PM
