Panasonic SCHDX3 - AMPLIFIER SPEAKER SYSTEM Operating Instructions Manual Download Page 4

4

Speaker set-up

Position the speakers

30

°

30

°

120

°

a

b

c

d

e

f

¡

Set the speakers up on an even surface to prevent them from
falling. Take proper precautions to prevent the speakers from
falling if you cannot set them up on an even surface.

¡

Keep your speakers at least 10 mm away from the system for
proper ventilation.

¡

Vibration may cause distortion in the picture if the speaker is
placed directly on the television. Use a rack or shelf for the center
speaker.

Note

If irregular colouring occurs on your television
These speakers are designed to be used close to a television,
but the picture may be affected with some televisions and set-up
combinations.
If this occur, turn the television off for about 30 minutes.
The television’s demagnetizing function should correct the problem.
If it persists, move the speakers further away from the television.

a

Center speaker (included)

b

Front speaker (left) (not included) 

c

Front speaker (right) (not included)

d

Surround speaker (left) (included)

e

Surround speaker (right) (included) 

f

Subwoofer (not included)

The front, center, and surround speakers should be placed at
approximately the same distance from the listening position. 

,,

,,

,,

,,

,,

,

,

,

,

,

,,,

,,,

,,,

30-35 mm

ø

 7.5-9.5

7-9 mm

Attach the rubber feet to the speaker

Turn the logo so 
it is horizontal.

Attach these rubber feet to prevent vibration causing the speakers to move or fall over. 
(See below if you would prefer to hang the speakers on the wall.)

Standing

Lying down

Rubber feet 
(4 per speaker,
included)

Rubber feet
(4 per speaker,
included)

Rubber feet
(included)

Metal wall mounts 
(2 sper speaker, included)

Rubber feet (included)

Cloth

Cloth

Attaching the surround speakers to the wall 

Screws 
(4 per speaker,
included)

Screws 
(not included)

267 mm

271 mm 

To attach horizonatally

To attach vertically

The surface you attach the speakers to must be able to support over  13 k

g

.

Note

The three speakers are the same. How you connect and place them determines whether they are center or surround speakers

Caution

¡

¡

Use the speakers only with the recommended
system. Failure to do so may lead to damage
to the amplifier and/or  the speakers, and may
result in the risk of fire. Consult a qualified
service person if damage has occurred or if
you experience a sudden change in
performance.

¡

¡

Do not attempt to attach these speakers to
walls using methods other than those
described in this manual.

Summary of Contents for SCHDX3 - AMPLIFIER SPEAKER SYSTEM









Reviews: