RQTX1138
RQTX1138
12
ENGLISH
RQTX1138
RQTX1138
External unit
(continued)
■
Charging the iPod/iPhone
When iPod/iPhone is being charged in standby mode,
“IPOD CHARGING” is shown on the main unit’s display.
Check iPod/iPhone to see if the battery is fully charged. If you are
not using iPod/iPhone for an extended period of time after recharging
has completed, disconnect it from the main unit as the battery will be
depleted naturally. (Once fully recharged, additional recharging will
not occur.)
•
•
The remote control and main unit are factory-set to “REMOTE 1” mode.
If you find the remote control unintentionally also controls other
equipment, you can switch to operate in “REMOTE 2” mode.
To switch to “REMOTE 2” mode (by main unit only)
Press and hold [AUX] and then press [2] until “REMOTE 2” is
displayed.
Press and hold [OK] and [2] for at least 2 seconds.
To return to “REMOTE 1” mode
Repeat the steps above but replace
[2]
with
[1]
.
(“REMOTE 1” will be displayed.)
Changing the main unit and remote control
mode
12
Notes on iPhone:
All phone features can only be controled by the iPhone’s touch
screen.
The unit does not display incoming calls or the phone status.
The ringtone of incoming call can be heard from the iPhone’s speaker.
When the unit is in iPod/iPhone mode, the ringtone can also be heard
from the unit’s speakers.
Connecting or disconnecting the iPhone from the unit will not cancel
a call.
There is no Apple Inc. specification that will guarantee the iPhone
responses above. iPhone responses may vary on new iPhone models
or iPhone new software updates.
•
•
•
•
•
■
Compatible iPod
Name
Memory size
iPod nano 5th generation (video camera)
8 GB, 16 GB
iPod touch 2nd generation
8 GB, 16 GB, 32 GB,
64 GB
iPod classic
120 GB, 160 GB (2009)
iPod nano 4th generation (video)
8 GB, 16 GB
iPod classic
160 GB (2007)
iPod touch 1st generation
8 GB, 16 GB, 32 GB
iPod nano 3rd generation (video)
4 GB, 8 GB
iPod classic
80 GB
iPod nano 2nd generation (aluminum)
2 GB, 4 GB, 8 GB
iPod 5th generation (video)
60 GB, 80 GB
iPod 5th generation (video)
30 GB
iPod nano 1st generation
1 GB, 2 GB, 4 GB
iPod 4th generation (color display)
40 GB, 60 GB
iPod 4th generation (color display)
20 GB, 30 GB
iPod 4th generation
40 GB
iPod 4th generation
20 GB
iPod mini
4 GB, 6 GB
Before requesting service, make the following checks. If you are in doubt about some of the check points, or if the remedies indicated in the
chart do not solve the problem, refer to “Product information” on page 3.
Troubleshooting guide
g
Common problems
Incorrect display or play will not start
You have not inserted the disc properly.
Insert it correctly.
The disc is scratched or dirty (Tracks
skipped).
There is moisture on the lens. Wait for about
an hour and then try again.
MP3 cannot be read
You may not be able to play MP3 if you
have copied a multi-session disc that has no
data between sessions.
When creating a multi-session disc, it is
necessary to close the session.
The amount of data on the disc is too small.
Set the amount of data to above 5 MB.
Noise is heard or no sound
While playing MP3, noise may occur if the
recording is poor.
Keep this unit away from mobile phones if
the interference is apparent.
Turn the volume up.
Switch the unit off, check and correct the
connection and then switch the unit on.
•
•
•
•
•
•
•
•
•
•
Causes include straining of the speakers
through excessive volume or power and
using the unit in a hot environment.
Humming heard during play
An AC power supply cord or fluorescent light
is near the cords. Keep other appliances
and cords away from this unit’s cables.
A beat sound or noise is heard while
receiving radio broadcast
Switch the television or other audio player
off or separate it from the unit.
Switch the portable audio player off if
connected to the AUX port.
A low hum or noise is heard during AM
broadcast
Keep the antenna away from other cables
and cords.
Keep the AM antenna away from the unit.
The picture on the television near the unit
disappears or stripes appear on the screen
The location and orientation of the antenna
are incorrect.
The television antenna wire is too close to
the unit. Separate the antenna wire of the
television from the unit.
•
•
•
•
•
•
•
No response when remote control buttons
are pressed
Check that the batteries are inserted
correctly (
➡
page 8).
g
Display
“--:--”
You plugged the AC power supply cord in
for the first time or there was a power failure
recently. Set the time (
➡
page 11).
“ADJUST CLOCK”
Clock is not set. Adjust the clock
accordingly.
“ADJUST TIMER”
Play timer is not set. Adjust the play timer
accordingly.
“PGM FULL”
The number of programmed tracks is limited
to 24. No further tracks can be programmed.
“NO PLAY”
A CD-ROM disc that is not in CD-DA or MP3
format is inserted. It cannot be played.
“ERROR”
Incorrect operation is performed. Read the
instructions and try again.
•
•
•
•
•
•
•
■
Compatible iPhone
Name
Memory size
iPhone 3GS
16 GB, 32 GB
iPhone 3G
8 GB, 16 GB
iPhone
4 GB, 8 GB, 16 GB
Compatibility depends on the software version of the iPod/iPhone.
•
