R
L
3
2
1
4
R6/LR6, AA
Aim at the sensor, avoiding obstacles, at a
maximum range of 7 m directly in front of
the unit.
Operation can be affected by strong light
sources, such as direct sunlight, and the
glass doors on cabinets.
•
•
Keep your speakers at least 10 mm (13/32”) away
from the system for proper ventilation.
These speakers do not have magnetic shielding. Do
not place them near televisions, personal computers
or other devices easily influenced by magnetism.
You cannot take the front net off the speakers.
•
•
•
Note
Left and right speakers are different.
Insert so the poles (+ and – ) match those
in the remote control.
Do not use rechargeable type batteries.
•
•
Standby/on switch [POWER
8
]
Press to switch the unit from on to
standby mode or vice versa.
In standby mode, the unit is still
consuming a small amount of power.
[SLEEP]
SLEEP timer operation ON/OFF or SLEEP time setting
CD/MP3 Program, Tuner Preset (Manual)
[PGM, -AUTO PRESET]
[Long press] Tuner Preset (Auto)
CD/MP3:
Delete all programs
[CLEAR]
[PLAY MODE]
Play mode button
[CD
q
/
h
]
Selector switch to CD.
Direct CD Play/CD Pause
[TUNER/BAND]
Selector switch to XM Band selection
or Tuner for FM and AM
Turn the volume up/down
[VOL-]
,
[+VOL]
[
z
PLAY]
Timer PLAY ON/OFF
[ALBUM ENTER]
MP3:
Confirm track selection
during Program Mode
XM:
Exit Category mode
Clock and Timer setting
[CLOCK/TIMER]
[1-9, 0,
≧
10]
Numbered buttons
To select a 2-digit number
e.g. 16: [
≧
10]
[1]
[6]
To select a 3-digit number
e.g. 226: [
≧
10]
[
≧
10]
[2]
[2]
[6]
[MUSIC PORT]
Selector switch to MUSIC PORT
[
g
]
CD stop button
[
2
/
u
,
1
\
i
] CD:
Skip/Search
MP3:
Track Skip
TUNER:
Tune up/down, [Long press] Auto tuning
SA-EN35
SA-EN35
[REPEAT]
Repeat ON/OFF
[SURROUND]
SURROUND mode ON/OFF
Delete last programmed track
[DEL]
[DISPLAY]
CD:
CD Display (Elapsed play time/Remaining play time)
MP3:
MP3 Display (Elapsed time/Album name/Track
name/ID3 [Album]/ID3 [Track]/ID3 [Artist])
XM:
XM Display (Channel number/Channel
name/Category name/Title/Artist)
Preset EQ mode selector
[PRESET EQ]
SA-EN35
SA-EN35
Remote control signal sensor
■
Use
■
Batteries
The remote control
Control guide
Display
Standby/on switch
[
^
]
Remote control signal sensor
Placement of speakers
Caution
Use the speakers only with the
recommended system. Failure to
do so may lead to damage to the
amplifier and/or speakers, and may
result in the risk of fire. Consult a
qualified service person if damage
has occurred or if you experience a
sudden change in performance.
Do not attach these speakers to
walls or ceilings.
•
•
Music port jack
[- ]
To adjust the volume
[
2
/
u
,
1
\
i
]
CD:
Skip/Search
MP3:
Track Skip
TUNER:
Tune up/down, [Long press] Auto tuning
[
g
]
CD stop button
[CD
q
/
h
]
Selector switch to CD. Direct CD Play/CD Pause
[MUSIC PORT]
Selector switch to MUSIC PORT
[
;
OPEN/CLOSE]
Open and Close CD lid
FM/AM/XM select button
[TUNER/BAND]
FM/AM select button
[TUNER/BAND]
2
3
SC-EN35
SC-EN33
[
;
, OPEN/CLOSE]
Open and Close CD lid
[ , , XM CATEGORY <, >]
MP3:
Album skip
XM:
Category Channel Selector
SC-EN35
SC-EN33
[ENTER]
Confirm track selection
during MP3 Program
Mode
[ , ALBUM]
Previous/Next Album
0
(Minimum)
50
(Maximum)
SC-EN35
Use the numbers indicated in parentheses when asking for replacement
parts.
Supplied accessories
(As of January 2007)
In the U.S.A. to order accessories, refer to “Accessory Purchases” on page 7.
1 Remote control
[
➡
page 2]
1 AC power supply cord
[
➡
page 3]
1 FM/AM antenna
[
➡
page 3]
2 Batteries
[
➡
page 2]
The included AC power supply cord is for use with this unit only. Do not use it with
other equipment.
Do not use an AC power supply cord from other equipment.
•
•
(N2QAYB000105)
(N2QAYB000108)
SC-EN35
SC-EN33
(K2CB2CB00018)
(N1DADYY00003)
AC power supply cord
SC-EN35
Right Speaker
Left Speaker
DC in cord to connect to main set
Red
Red
Black
Black
The included Canadian French language sheet corresponds to this unit’s English
displays.
SC-EN35_3P.indd 2
22/03/2007 17:23:20
