10
RQT8979
Assembly and Installation
2
Fit the stand onto the front speaker
R (or surround speaker L).
Align the two projections in the assembled
stand with the two holes in the front speaker R
(or surround speaker L), and fit together.
Attach the stand using the stand mounting
screw
(included).
Use the center screw hole to fit the stand on to the
speaker.
3
Connect the speaker cables (not
included) to the terminals.
Before connection, pass the speaker cables through
the hole marked “Front-R/Sur.-L” in the back of the
stand base.
(Use the hole marked “Front-L/Sur.-R” for the front
speaker L and surround speaker R.)
The speaker cables must have a thickness of 3.0 mm
(1/8'') or less to fit into the cable groove (
á
page 11
step 4).
Center speaker cables
(approx. 4 m (13.1 ft.))
(–) cable
:
Connect this to the “CENTER” black negative (–)
terminal.
(+) cable
:
Connect this to the “CENTER” red positive (+)
terminal.
Front speaker cables
(approx. 4 m (13.1 ft.))
(–) cable
:
Connect this to the “LF” black negative (–) terminal.
(+) cable
:
Connect this to the “HF” red positive (+) terminal.
• Do not remove the shorting bars.
Surround speaker cables
(approx. 10 m (32.8 ft.))
(–) cable
:
Connect this to the black negative (–) terminal.
(+) cable
:
Connect this to the red positive (+) terminal.
Remove the vinyl covering the tips of speaker
cables by twisting it off.
Turn the thumb nut in the loosening direction
until the hole in the terminal becomes visible.
Insert the conductor into the hole, and tighten
the thumb nut.
Loosen the screws of the banana plugs
(included).
Remove the vinyl covering the tips of speaker
cables about 10 mm (13/32'') by twisting it off.
Twist the conductors of the speaker cable.
Insert the speaker cables all the way, then firmly
tighten the screws.
• Tighten the thumb nuts of the terminals all the
way, and connect the plugs.
• When using commercially available banana plugs,
use banana plugs that have an overall diameter of
10 mm (13/32'') or less.
• Do not use the banana plugs when the speakers
are to be mounted on a wall.
Never short-circuit positive (+) and negative (–)
speaker wires.
Front-L/Sur.-R
Front-R/Sur.-L
Front-L/Sur.-R
Front-L/Sur.-R
Front-R/Sur.-L
Front-R/Sur.-L
Front-L/Sur.-R
Front-L/Sur.-R
Front-L/Sur.-R
Front-R/Sur.-L
Front-R/Sur.-L
Front speaker
Surround speaker
Front-R/Sur.-L
Front-R/Sur.-L
How to connect speaker cables
If using banana plugs (4 mm plugs)
N
ote
10 mm
(13/32'')
10 mm
(13/32'')