RQT7837
4
(R)
(L)
1
FM indoor antenna
Tape the antenna where
reception is best.
1
2
Adhesive
tape
Adhesive
tape
For Europe
For others
4
AC mains lead
FOR THE UNITED KINGDOM ONLY
READ THE CAUTION FOR THE AC MAINS LEAD ON PAGE 2
BEFORE CONNECTION.
Note
The included AC mains lead is for use with this unit only.
Do not use it with other equipment.
For your reference
To save power when the unit is not going to be used for a long time,
unplug it from the household mains socket. You will need to reset some
memory items after plugging in the unit.
Insertion of connector
Even when the connector is perfectly
inserted, depending on the type of inlet
used, the front part of the connector may
jut out as shown in the drawing. However there is no problem using the unit.
Connector
Appliance
inlet
Approx. 6 mm
2
AM loop antenna
Stand the antenna
up on its base.
1
2
1
2
For Europe
For others
Set-up
Connect the AC mains lead only after all other connections have been made.
Optional antenna connections (
A
page 11).
Preparation
Twist and pull off the vinyl tip of the antenna wire (for South Africa, Australia
and N.Z.) and speaker cords.
When the unit is first plugged in, a demonstration of its functions may
be shown on the display.
If the demo setting is off, you can show a demonstration by selecting
“DEMO ON”.
Press and hold [DISP, –DEMO].
The display changes each time the button is held down.
NO DEMO (off)
DEMO ON (on)
While in the standby mode, select “NO DEMO” to reduce power
consumption.
Note
DEMO function cannot be turned on when Dimmer is on.
Turning the demo function on/off
Use only the supplied speakers.
The combination of the main unit and speakers provide the best
sound. Using other speakers can damage the unit and sound quality
will be negatively affected.
Notes on speaker use
•
You can damage your speakers and shorten their useful life if you
play sound at high levels over extended periods.
•
Reduce the volume in the following cases to avoid damage.
– When playing distorted sound.
– When adjusting the sound quality.
Connection
3
Speakers
Placement
Place the front speakers so that the super tweeter is on the
inside.
Note
•
Keep your speakers at least 10 mm away from the system for
proper ventilation.
•
These speakers do not have magnetic shielding. Do not place
them near televisions, personal computers or other devices easily
influenced by magnetism.
•
You cannot take the front net off the speakers.
Caution
•
Use the speakers only with the recommended system.
Failure to do so may lead to damage to the amplifier and/or
the speakers, and may result in the risk of fire. Consult a
qualified service person if damage has occurred or if you
experience a sudden change in performance.
•
Do not attach these speakers to walls or ceilings.
To household mains socket
Connect the left (L) side
in the same way.
Blue (–)
Gray (+)
Red (+)
(SB-WAK630)
Subwoofer
Red
Red
Gray
Black
Blue
Black (–)
Black
Red (+)
Black (–)
S.WOOFER
H.BASS
DISP, –DEMO
Front speaker
(right)
Super tweeter
Place on the floor or a
sturdy shelf so that it
won’t cause vibration.
Super tweeter
Main unit
Front speaker
(left)
Subwoofer
