17
VQT5F14
Ad
van
ced
o
p
e
ra
ti
o
n
s
Referen
ce
Secure the speaker.
Using the tie down area on the rear of the speaker
and a cord (not supplied), secure the speaker to a
wall anchor (not supplied) permanently attached
to the wall.
1
Thread a cord to the speaker.
≥
Use a cord of less than
‰
2.0 mm, which is
capable of supporting over 10 k
g
.
e.g.,
[XH166]
Front speaker
A
Cord (not supplied)
2
Thread a cord from the wall to the speaker
and tie tightly.
B
Wall anchor (not supplied)
C
Wall or pillar
D
Approx.150 mm
E
Approx.100 mm
Reference
Troubleshooting guide
Before requesting service, please perform the
following checks.
If the problem remains unresolved, consult
your dealer for instructions.
∫
Unit does not respond to remote
control or unit’s buttons.
Disconnect the AC mains lead, wait 1 minute,
then reconnect the AC mains lead.
The following do not indicate a problem with
this unit:
– Regular disc rotating sounds.
– Image disturbance during search.
To return to the factory defaults.
¾
Select “Restore” in “Default” in the Setup
menu. (
>
15)
To return all settings to the factory preset.
¾
Reset the unit as follows:
1
Turn the unit on.
2
Press [
<
] to open the disc tray.
3
Press and hold [
∫
] and [
1
/
;
] on the main
unit at the same time for more than
5 seconds.
You have forgotten your ratings password.
You want to cancel the ratings level.
¾
The ratings level returns to the factory defaults.
j
Restore the default settings following the
steps described in “To return all settings to
the factory preset.”. (
>
above)
This unit does not recognize the USB
connection correctly.
¾
Disconnect and re-connect the USB cable. If
it still does not recognize the connection, turn
this unit off and on again.
¾
USB devices may not be recognized by this
unit when connected using the following :
j
a USB hub
j
a USB extension cable
¾
If you connect USB HDD to this unit, use the
USB cable that is supplied with the HDD.
To prevent tipping/falling of
the speakers
When mounted on a wall
When placed on the floor
Do you have the latest firmware installed?
Panasonic is constantly improving the unit’s
firmware to ensure that our customers are
enjoying the latest technology. (
>
7)
General operation
SC-XH166&105GSGA-VQT5F14_mst.book 17 ページ ２０１４年２月１２日 水曜日 午後１時３４分
