ENGLISH
ENGLISH
8
9
RQTV0320
ENGLISH
ENGLISH
8
9
Simple setup/Tray/disc handling procedure
Simple setup
8
9
Simple setup
(continued)
Tray/disc handling procedure
Adhere to the following to avoid problems.
Removing the power plug
Press [
8
] to turn off the unit and remove the power plug only after all the displays have disappeared.
Tray caution
Always press [
;
, OPEN/CLOSE] to insert or remove a disc.
Do not push or pull out the tray by hand as this will cause an
accident.
•
•
Place the disc label up in the center of the tray.
Insert only one disc into each tray.
•
•
Do not attach labels or stickers to discs (This may cause disc
warping, rendering it unusable).
Do not write on the label side with a ball-point pen or other
hard writing instrument.
Do not use record cleaning sprays, benzine, thinner, static
electricity prevention liquids or any other solvent.
Do not use scratch-proof protectors or covers.
Do not use the following discs:
- Discs with exposed adhesive from removed stickers or
labels (rented discs, etc).
- Discs that are badly warped or cracked.
- Irregularly shaped discs, such as heart shapes.
•
•
•
•
•
Wipe with a damp cloth and then wipe dry.
OPEN/
CLOSE
H
SI
L
G
N
E
Disc handling precautions
Inserting a disc
Cleaning discs
Reset the clock regularly to maintain accuracy.
Note
1
2
3
Press [CLOCK/TIMER] to select
“CLOCK”.
Every time you press the button:
CLOCK
z
PLAY
z
REC
Previous display
(Within 7 seconds or so)
Press [
u
,
2
/REW] or [
i
,
1
/FF]
to set the time.
Press [CLOCK/TIMER] to finish
setting the time.
This is a 24-hour clock.
Displaying the time
Press [CLOCK/TIMER] once when the unit is on or in standby mode.
The time is displayed for a few seconds.
Setting the time
VK870_GC_GS_EN (RQTV0320-1G).indb 9
5/7/2008 10:01:11 AM
