![Panasonic SC-UA90 Operating Instructions Manual Download Page 11](http://html.mh-extra.com/html/panasonic/sc-ua90/sc-ua90_operating-instructions-manual_278489011.webp)
11
T
Q
B
J2
140
D:\Publishing\Panasonic\SC-UA90.70\SC-UA90 GS.GW TQBJ2140 En.fm
█
Selecting a preset station
1
Press [PLAY MENU] repeatedly to select
“TUNE MODE”.
Or touch [
8
] on the unit to select “PRESET”. Continue
with step 3.
2
Press [
Y
,
U
] to select “PRESET” and then press
[OK].
3
Press the numeric buttons, [
2
/
3
] or
[
5
/
6
] to select the preset station.
Improving the sound quality
1
Press [PLAY MENU] repeatedly to select
“FM MODE”.
2
Press [
Y
,
U
] to select “MONO” and then press
[OK].
To cancel, select “STEREO”.
“MONO” is also cancelled when you change the
frequency.
To memorise the setting
Continue with step 4 of “Manual presetting” (
~
10).
Checking the signal status
Press [DISPLAY].
Recording
This system can record up to 800 folders (maximum 999
tracks in an album) or a total of 8000 tracks, depending on
the available storage capacity of the internal memory or
the USB device in
USB B
.
To check storage space
In the stop mode, press [DISPLAY] repeatedly.
Example: Remaining recording time of the internal memory.
• “UPDATE” is shown when the system is reading the
USB device.
• “NO DEVICE” is shown if there is no USB device
connected to
USB B
.
To select where recordings are kept
1
Press [SETUP] repeatedly to select “REC TO?”.
2
Press [
Y
,
U
] to select “MEMORY” or “USB B” and
then press [OK].
Note:
• All recordings are in “.mp3” format.
• You cannot do recording when you are using random
playback mode or in the optical input source.
• The DJ function or Karaoke function is switched off when
you start recording.
• Repeat playback mode is cancelled during recording.
• A new album is added each time you do a recording.
• The sequence of album may change after the recording.
• The recordings are kept in a folder named “REC_DATA” in
the USB device or the internal memory.
• USB status indicator blinks in red during USB recording.
• Internal memory status indicator blinks in red during internal
memory recording.
Basic recording
1
Select the source you want to record.
CD-DA
Prepare the disc playback mode.
Make sure the disc is stopped.
Radio
Tune in to the radio station.
AUX
Connect and play the equipment (
~
17).
FM – – – –
The FM signal is weak.
The system is not tuned in to a station.
FM ST
The FM signal is in stereo.
FM MONO
“MONO” is selected as the “FM MODE”.
The FM signal is in monaural.
Record all
tracks
Select “OFF PLAYMODE” (
~
9).
Record a
specified track
Select “1-TRACK” (
~
9).
Internal memory
source
Remaining recording time
SC-UA90 GS.GW TQBJ2140 En.fm Page 11 Tuesday, August 7, 2018 9:42 AM