12.5 To clear all Error code
1. Press “STOP/TUNE MODE” button for 5 seconds.
2. FL indicator shows “CLEAR” for 1 second and
change to “T”.
12.6 How to get out from Self-Diagnostic function
1. Press “Power” button OFF.
12.7 Power Amplifier Failure (F61)
1. When power amplifier fail, F61 will indicate
automatically.
12.8 Description of Error Code
12.8.1 Abnormality detection for Deck
Mechanism block
No. Abnormal Items Error Method of Detection
Display
1 MODE SW abnormal H01 Normal operation during mecha transition, MODE SW abnormal is memorized. The
content of
abnormality can be confirmed in the abnormal detection mode explained in the
later section.
2 REC INH SW abnormal H02 The content of abnormality can be confirmed in the abnormal detection mode
explained in the later
section.
3 HALF SW abnormal H03 The content of abnormality can be confirmed in the abnormal detection mode
explained in the later
section.
4 Reel pulse abnormal F01 The content of abnormality can be confirmed in the abnormal detection mode
explained in the later
section.
12.8.2 Abnormality detection for CD/Changer
block
No. Abnormal Items Error Method of Detection
Display
1 REST SW abnormal F15 Under normal operation (Self-Diagnostic Mode inclusive), this error occurs
when the REST SW ON
is not detected within the specified time and shall be memorized.
2 Transmission error between F26 Under normal operation (Self-Diagnostic Mode inclusive), this error occurs
when
CD servo LSI and micon the selection is set to CD and SENSE=’H’ is
detected and SENSE=’L’ is notdetected
within a fail safe time (20ms) after system command transmission was sent.
3 CLAMP SW abnormal F16 Refer to section 12.8.4 (Mechanism Error Code Table) [M-0A] error is
detected.
4 BOTTOM SW abnormal F17 Refer to section 12.8.4 (Mechanism Error Code Table) [M-09] error is
detected.
5 POSITION SW abnormal F27 Refer to section 12.8.4 (Mechanism Error Code Table) [M-05 ~ M-08] error is
detected.
6 SW1 abnormal F28 Refer to section 12.8.4 (Mechanism Error Code Table) [M-02 ~ M-08] error is
detected.
7 SW2 abnormal F29 Refer to section 12.8.4 (Mechanism Error Code Table) [M-02 ~ M-08] error is
detected.
8 OPEN SW abnormal H15 Refer to section 12.8.4 (Mechanism Error Code Table) [M-01] error is
detected.
9 CLOSE SW abnormal H16 Refer to section 12.8.4 (Mechanism Error Code Table) [M-01] error is
detected.
10 DISC SENSOR F30 Refer to section 12.8.4 (Mechanism Error Code Table) [M-01] error is
detected.
39
Summary of Contents for SC-TM23
