4
Sim
ple S
etu
p
Asse
mb
ling the
s
p
ea
ker
s
RQ
TX00
98
ENGL
ISH
[PT560]
Front speakers
[PT860]
Front speakers and surround speakers
Preparation
≥
To prevent damage or scratches, lay down a soft cloth and perform assembly on it.
≥
For assembly, use a Phillips-head screwdriver.
≥
For optional wall mount, refer to page 6.
∫
Preventing the speakers from falling
≥
You will need to obtain the appropriate screw eyes to match the
walls or pillars to which they are going to be fastened.
≥
Consult a qualified housing contractor concerning the
appropriate procedure when attaching to a concrete wall or a
surface that may not have strong enough support. Improper
attachment may result in damage to the wall or speakers.
Speaker assembly option
step
1
Assembling the speakers
Make sure you have all the indicated components before starting assembly, setup, and connection.
[PT560]
2 Front speakers
[PT860]
2 Front speakers and
2 Surround speakers
[PT560]
2 Stands (with cable)
[PT860]
4 Stands
≥
2
k
stands with short cable: For front
speakers
≥
2
k
stands with long cable: For surround
speakers
[PT560]
2 Bases
[PT860]
4 Bases
[PT560]
8 screws
[PT860]
16 screws
Tighten securely.
Slide into the groove.
Position the
cable between
the ridges.
Tighten securely.
Press into the groove.
Insert the wire fully.
i
: White
j
: Blue
Push!
Leave about 90 mm
Leave about 100 mm
You can remove and use the cable from
the stand. To reattach the cable, refer to
page 6.
Insert the wire fully.
i
: White
j
: Blue
Push!
Tighten securely.
Press into the groove.
Thread the speaker cable through
the base.
Attach the speaker.
String
(not included)
Thread from the wall to the speaker and tie tightly.
Rear of the speaker
Wall
Approx.
150 mm
Screw eye
(not included)
4
SC-PT560_860E-RQTX0098-R_eng.book Page 4 Tuesday, December 4, 2007 9:02 AM
Downloaded From TheatreSystem-Manual.com Manuals
