8
RQ
TX02
16
Getting S
tarted
Conserving power
This unit consumes a small amount of power, even
when it is in standby mode (approx. 0.2 W). To save
power when the unit is not to be used for a long time,
unplug it from the household AC mains socket.
You will need to reset some memory items after
plugging in this unit.
[Note]
The included AC mains lead is for use with this unit only.
Do not use it with other equipment. Also, do not use
cords for other equipment with this unit.
Do not:
≥
mix old and new batteries.
≥
use different types at the same time.
≥
take apart or short circuit.
≥
attempt to recharge alkaline or manganese batteries.
≥
use batteries if the covering has been peeled off.
Mishandling of batteries can cause electrolyte leakage
which can severely damage the remote control.
Remove the batteries if the remote control is not going to be
used for a long period of time. Store in a cool, dark place.
Aim at the remote control signal sensor (
B
39), avoiding
obstacles, at a maximum range of 7 m directly in front of
the unit.
step 3
AC mains lead connection
BE
S
URE TO READ THE CAUTION FOR THE
AC MAIN
S
LEAD ON PAGE 4 BEFORE CONNECTION.
AC IN
This unit
To household mains socket
AC mains lead
(included)
step 4
Preparing the remote control
Batteries
CAUTION
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type
recommended by the manufacturer.
Dispose of used batteries according to the
manufacturer’s instructions.
≥
Use alkaline or manganese batteries.
≥
Do not heat or expose to flame.
≥
Do not leave the battery(ies) in an automobile
exposed to direct sunlight for a long period of time
with doors and windows closed.
R6/LR6, AA
Insert so the poles (
and
) match those in the
remote control.
Press in and lift up.
Replace the cover.
Use
Q
UICK ST
AR
T GUIDE
Q
U
IC
K
S
TA
R
T
G
U
ID
E
Q
UICK ST
AR
T GUIDE
step 3-4
SC-PT470EB-RQTX0216-B_eng.book Page 8 Monday, December 22, 2008 3:28 PM
