7
RQT9
98
8
1
Press [
] to select “BLUETOOTH”.
2
Touch and hold your device on the NFC touch
area of this unit [
]. (
>
5)
Do not move the Bluetooth
®
device until it beeps,
displays a message or reacts in some way.
Once the Bluetooth
®
device has reacted, move the
device away from this unit.
• When the registration and connection of the Bluetooth
®
device is complete, the name of the connected device
is indicated on the display for a few seconds.
• The location of the NFC touch area differs depending
on the device. When a connection cannot be
established even if your Bluetooth
®
device has touched
the NFC touch area of this unit, change the position of
the device. The condition may also improve if you
download the dedicated app “Panasonic Music
Streaming” and start it up.
3
Start playback on the Bluetooth
®
device.
Note:
• If you touch another device to this unit, you can update the
Bluetooth
®
connection. The previously connected device
will be disconnected automatically.
• When the connection is established, playback may start
automatically depending on the type of device being used.
• The One-Touch Connection may not work properly
depending on the type of device being used.
You can change the transmission mode to prioritise
transmission quality or sound quality.
Preparation
• Press [
] to select “BLUETOOTH”.
• If a Bluetooth
®
device is already connected, disconnect
it.
1
Press [PLAY MENU] repeatedly to select
“LINK MODE”.
2
Press [
2
,
1
] to select the mode and then press
[OK].
MODE 1
: Emphasis on connectivity
MODE 2
: Emphasis on sound quality
Note:
• Select “MODE 1” if the sound is interrupted.
• The factory default is “MODE 2”.
If the sound input level from the Bluetooth
®
device is too
low, change the input level setting.
Preparation
• Connect a Bluetooth
®
device.
1
Press [PLAY MENU] repeatedly to select “INPUT
LEVEL”.
2
Press [
2
,
1
] to select the level and then press [OK].
“LEVEL 0”
,.
“LEVEL
i
1”
,.
“LEVEL
i
2”
^---------------------------------------------J
Note:
• Select “LEVEL 0” if the sound is distorted.
• The factory default is “LEVEL 0”.
1
While a Bluetooth
®
device is connected:
Press [PLAY MENU] repeatedly to select
“DISCONNECT?”.
2
Press [
2
,
1
] to select “OK? YES” and then press
[OK].
Note:
• You can also disconnect the Bluetooth
®
device by pressing
and holding [
-PAIRING] on the unit.
• The Bluetooth
®
device will be disconnected if a different
audio source (e.g., “CD”) is selected.
When “SC-PMX70” is selected from a paired Bluetooth
®
device’s Bluetooth
®
menu, this unit will turn on
automatically from standby mode and establish a
Bluetooth
®
connection.
1
Press [SETUP] repeatedly to select
“BLUETOOTH STANDBY”.
2
Press [
2
,
1
] to select “ON” and then press [OK].
Note:
• To turn the function off, select “OFF” in step 2.
• The factory default is “OFF”. If this function is set to “ON”,
the standby power consumption will increase.
Media information
• Please be aware that Panasonic accepts no
responsibility for the loss of data and/or information.
(as of December 2014)
Note:
• Do not connect models not listed in the above. Unexpected
behaviour may occur.
• Compatibility depends on the software version. Update
your iPhone/iPad/iPod to the latest software before using it
with this unit.
• Read the User Guide of the iPhone/iPad/iPod for the
operating instructions.
Bluetooth
®
transmission mode
Bluetooth
®
input level
Disconnecting a Bluetooth
®
device
Bluetooth
®
standby
Compatible iPhone/iPad/iPod
iPhone 6 Plus / iPhone 6 / iPhone 5s / iPhone 5c /
iPhone 5 / iPhone 4s / iPhone 4 / iPhone 3GS /
iPhone 3G / iPhone
iPad Air 2 / iPad Air / iPad
(3rd and 4th generation)
/
iPad 2 / iPad / iPad mini 3 / iPad mini 2 (iPad mini
with Retina display) / iPad mini
iPod touch
(1st through 5th generation)
iPod nano
(2nd through 7th generation)
SC-PMX70-70B_EGEBGN-RQT9988-B.book 7 ページ ２０１４年１２月２９日 月曜日 午後１時２１分
