manualshive.com logo in svg

Panasonic SC-PM9, Operating Instructions Manual, Page: 5 / 24

Share
Download
Panasonic SC-PM9 Operating Instructions Manual Download Page 5

Before use

5

RQT7357

Connections

2

Connect the AM loop antenna.

After attaching the antenna, turn on the system and tune in
a broadcast station. Put the antenna where the reception
is best and interference is minimal.

3

Connect the speaker cables.

Connect the speaker cords without tags to the black
terminals, so (+) and (–) are correct.
Connect the speaker cords with red tags to the red
terminals, so (+) and (–) are correct.
Never allow the exposed wires to contact each other when
connected.

Incorrect connection can damage the unit.

Caution

Use only the supplied speakers.

The combination of the main unit and speakers provide the
best sound. Using other speakers can damage the unit and
sound quality will be negatively affected.

Caution
• Use the speakers only with the recommended

system.
Failure to do so may lead to damage to the amplifier
and/or the speakers, and may result in the risk of
fire. Consult a qualified service person if damage has
occurred or if you experience a sudden change in
performance.

• Do not attach these speakers to walls or ceilings.

4

Connect the AC power supply cord.

  

 Note

The included AC power supply cord is for use with this unit
only. Do not use it with other equipment.

Optional antenna connections

You may need an outdoor antenna if you use this system in a
mountainous region or inside a reinforced-concrete building, etc.

A

FM outdoor antenna

Disconnect the FM indoor antenna if an FM outdoor antenna is
installed.

Note

An outdoor antenna should be installed by a qualified technician
only.

B

AM outdoor antenna

Connect the outdoor antenna without removing the AM loop
antenna. Run 5 to 12 m of vinyl-covered wire horizontally along
a window or other convenient location.

Note

When the unit is not in use, disconnect the outdoor antenna to
prevent possible damage that may be caused by lightning.
Never use an outdoor antenna during a lightning storm.

2

AM ANT

EXT

FM ANT

75

LOOP

1

2

3

L

R

(SB-PM9)

1

2

3

4

A

AM ANT

EXT

FM ANT

75

LOOP

B

5-12m

AM ANT

EXT

FM ANT

75

LOOP

AM loop antenna

Black (

·

)

Red (

ª

)

Red tag

Copper

(

ª

)

Silver (

·

)

Black (

·

)

Red (

ª

)

To household AC outlet

FM outdoor antenna
(not included)

75 

Ω

 coaxial cable

(not included)

AM outdoor antenna
(not included)

RQT7357-C_04-07_EN

12/1/04, 5:59 pm

5

Summary of Contents for SC-PM9

























Reviews:

No comments