9
TQ
BM0877
D:\New folder\PM700\Source\xml\PM700\PM700EB.EG_TQBM0877_EN.fm
[PM700]
Connect the FM indoor antenna.
Put the antenna where reception is best.
2
Connect the speakers.
Connect the speaker cables to the corresponding terminals.
3
Connect the AC mains lead.
Do not use any other AC mains leads except the supplied one.
Conserving power
The system consumes a small amount of power even when it is in standby mode. Disconnect the
power supply if you do not use the system.
Some settings will be lost after you disconnect the system. You have to set them again.
Note:
Keep the antennas away from the speaker cables and the AC mains lead to avoid picking up noise.
Be careful not to cross (short-circuit)
or reverse the polarity of the speaker
wires as doing so may damage the
speakers.
(For the AC mains plug of three pins)
READ THE “Caution for AC mains lead” BEFORE CONNECTION. (
Adhesive tape
(not supplied)
Red
Black
To household
mains socket
PM700EB.EG_TQBM0877_EN.fm Page 9 Wednesday, March 15, 2023 2:48 PM