Panasonic SC-PM46DB Operating Instructions Manual Download Page 10

RQTV0303

10

DAB

 

DAB operation

DAB operation

1

Press [DAB] to enter DAB mode.

The unit comes on.

Note

“Scan Failed.” appears if no stations are memorized. If this occurs, 
adjust the antenna and try Auto scanning or change the Auto scan 
frequency range. (

 

page 11)

2

Press [PLAY MODE] to select “STATION TUNE”.

Each time you press the button:

“STATION TUNE” 

 “PRESET TUNE”

3

Press [ /

4

] or [ /

¢

] to select a station.

The station name changes in alphanumeric order.

DAB Auto Scan

DAB Auto Scan

Press and hold [PLAY MODE] until “DAB Auto Scan” appears.

When a frequency is tuned by Auto scanning on this unit, the ensemble 
corresponding to the frequency is displayed for approximately 2 
seconds.

Note

• When updating memory with Auto scan, preset stations are not 

erased or changed.

• When a frequency cannot be received, the previous memory is 

restored.

•  Total stations received is displayed for approximately 2 seconds.

DAB (continued)

Presetting

Presetting

Presetting channel

Presetting channel

Up to 20 channels can be set.

1

Press [ /

4

] or [ /

¢

] to select a station.

2

Press [PROGRAM].

3

Press the numeric buttons to select a channel.

4

To preset more stations, press [PLAY MODE] to select 
“STATION TUNE” and then repeat steps 1 to 3.

Note

You cannot preset stations when the station is not broadcasting or 
when you are selecting a secondary service. 

Selecting a preset channel

Selecting a preset channel

1

Press [PLAY MODE] to select “PRESET TUNE”.

2

Press [ /

4

] or [ /

¢

] or numeric buttons to select a 

channel.

 

Listening to the secondary 

Listening to the secondary service

service

Press the [DAB SECONDARY] to select the secondary service.

“ 

 ” is displayed if there is a secondary service broadcast.

The secondary services are selected each time the button is pressed. 
The primary service is returned to after the last secondary service.

DISPLAY

 

Display

Display

Press [DISPLAY] to select the display.

The information scroll through the display.
Each time you press the button:

PM46_EB_En_new9.indd   10

PM46_EB_En_new9.indd   10

1/10/08   10:29:52 AM

1/10/08   10:29:52 AM

Summary of Contents for SC-PM46DB

















Reviews: