background image

5

TQ

BJ

21

23

Making the connections

Connect the AC mains lead only after all the other 
connections have been made.

1

Connect the DAB antenna.

Be sure to tighten fully the nut.
Rotate the antenna at 

 to improve reception.

Note:

• Do not use any other DAB antenna except the 

supplied one.

• Do not mount the DAB antenna on metal objects 

such as water pipes or any metal parts of the 
building.

• Use an outdoor antenna if the reception is poor.

2

Connect the speakers.

3

Connect the AC mains lead.

Do not use an AC mains lead from other equipment.

Conserving power

The system consumes a small amount of power 
(

Z

“Specifications”) when it is in standby mode. 

Disconnect the power supply if you do not use the 
system.
Some settings will be lost after you disconnect the 
system. You have to set them again.

Placement of speakers

The left and right speakers are the same.
You cannot remove the net of the speakers.

Use only the supplied speakers.

You can cause damage to the system and decrease the 
sound quality if you use other speakers.

Note:

• Keep your speakers more than 10 mm from the main unit 

for ventilation.

• Put the speakers on a flat safe surface.
• These speakers do not have magnetic shielding. Do not put 

them near TVs, PCs or other equipment easily influenced 
by magnetism.

• When you play at high levels for a long period, it can cause 

damage to the speakers and decrease the life of the 
speakers.

• Decrease the volume in these conditions to prevent 

damage:
– When the sound is distorted.
– When you adjust the sound quality.

Be careful not to cross 
(short-circuit) or reverse 
the polarity of the speaker 
wires as doing so may 
damage the speakers.

(6

:

)

(6

:

)

3

2

1

Adhesive tape 
(not supplied)

(6

:

)

(6

:

)

B

A

Red

Black

(6

:

)

(6

:

)

READ THE “Caution for AC mains lead” BEFORE 
CONNECTION.

CAUTION!

Use the speakers only with the recommended 
system. If not, you can cause damage to the 
amplifier and speakers and can cause a fire. 
Consult an approved service personnel if damage 
occurs or if there is a sudden apparent change in 
performance.

Do the procedures included in these instructions 
when you attach the speakers.

To household 
mains socket

Summary of Contents for SC-PM252


















Reviews: