12
TQ
BJ
21
23
Play timer
(Except for Bluetooth
®
source)
You can set the timer to come on at a certain time to wake
you up.
Preparation
Set the clock.
1
Press [SETUP] repeatedly to select “TIMER ADJ”.
2
Press [
R
,
T
] to set the start time and then press
[OK].
3
Do step 2 again to set the end time.
4
Press [
R
,
T
] to select the source you want to play
and then press [OK].
To start the timer
1
Press [SETUP] repeatedly to select “TIMER SET”.
2
Press [
R
,
T
] to select “SET” and then press [OK].
“
#
” is shown.
To cancel, select “OFF”.
The system must be switched off for the timer to
operate.
To check the setting
Press [SETUP] repeatedly to select “TIMER ADJ” and
then press [OK].
In standby mode, press [DISPLAY] two times.
Note:
• The timer starts at a low volume and increases gradually to
the preset level.
• The timer comes on at the set time every day if the timer is
on.
• If you switch off the system and then switch on again while a
timer is in operation, the timer will not stop at the end time.
Sound effects
1
Press [SOUND] repeatedly to select the sound
effect.
2
Press [
R
,
T
] to select the setting and then press
[OK].
PRESET EQ
“HEAVY” (default), “SOFT”, “CLEAR”,
“VOCAL” or “FLAT”
BASS
–4 to +4 (default: 0)
Using the main unit
1. Press [BASS].
2. Press [
2
/
3
] or [
5
/
6
].
Note:
This setting can change when you select a
PRESET EQ setting.
TREBLE
–4 to +4 (default: 0)
Using the main unit
1. Press [TREBLE].
2. Press [
2
/
3
] or [
5
/
6
].
Note:
This setting can change when you select a
PRESET EQ setting.
D.BASS
“ON D.BASS” (default) or “OFF D.BASS”
SURROUND “ON SURROUND” or
“OFF SURROUND” (default)
