Panasonic SC-PM21, Operating Instructions Manual, Page: 8 / 32

8
RQT7968
Advanced CDs and MP3 functions Advanced CDs and MP3 functions
Direct access play Direct access play
This function allows you to start play from a specific track.
CD-DA
Press the numeric buttons to select and play your
desired track.
MP3
1 Press [ALBUM or ] to select the album.
2
Press
[
/FF/
¢
] once and then the numeric buttons
to select and play your desired track.
For two-digit track, press [
h
10] once then the two digits.
For three-digit track, press [
h
10] twice then the three digits.
• This function does not work during any random/program mode.
Repeat play Repeat play
CD-DA
MP3
You can repeat program play or other selected play
mode.
Press [REPEAT] before or during play.
“REPEAT ON” and “ ” are displayed.
To cancel
Press [REPEAT] again.
“REPEAT OFF” is displayed and “ ” is cleared.
Marking a track Marking a track
CD-DA MP3
Enable you to mark one track on the disc loaded so
that you can directly play the track later.
During play, press and hold the [MARKER] until
“STORING” blinks on the display to mark your favorite
track.
Press [MARKER] during play or stop mode to recall and
play a marked track.
• The marker memory is cleared when you open the CD tray.
• This function does not work during any random/program mode.
Program play Program play
This function allows you to program up to 24 tracks.
CD-DA
1 Press [CD
6
] and then [STOP
7
].
2
Press [PROGRAM].
3 Press the numeric buttons to select your desired
track.
Repeat this step to program other tracks.
Example:
Track number
Program number
Program indicator
4 Press [CD
6
] to start play.
MP3
1 Press [CD
6
] and then [STOP
7
].
2 Press [PROGRAM].
3 Press [ALBUM or ] to select your desired
album.
4 Press
[
/FF/
¢
] once and then numeric buttons to
select your desired track.
Example:
Album number
Track number
5
Press [ENTER] to store the program.
Repeat steps 3 to 5 to program other tracks.
6
Press [CD
6
] to start play.
To Action
cancel program
mode Press [PROGRAM] in the stop mode.
replay the program Press [PROGRAM] then [CD
6
].
check program
contents Press [ /REW/
4
]
ġ
or
ġ
[ /FF/
¢
] when
“PGM” is displayed in the stop mode.
To check while programming, press
[PROGRAM] twice after “PGM” appears,
then press [ /REW/
4
] ġ or ġ [ /FF/
¢
].
add to the program Repeat step 3 in the stop mode for CD-DA.
Repeat steps 3 to 5 in the stop mode for
MP3.
clear the last track Press [DEL] in the stop mode.
clear all
programmed tracks Press [CLEAR] in the stop mode.
“PGM CLEAR” is displayed.
• When you try to program more than 24 tracks “PGM FULL”
appears.
• During program play for CD-DA, you can search backward or forward
only within the current track.
• The program memory is cleared when you open the CD tray.
INTRO function (Album scan) INTRO function (Album scan)
MP3
This function allows you to find an album by listening
to the first track of all albums in the current disc for
10 seconds each.
1 Press [CD
6
] and then [STOP
7
].
2 Press [INTRO] to start the intro function.
3
While your desired album is playing, press [CD
6
].
Intro mode canceled and the playback continues.
INTRO function is canceled after playing the first track in the last
album.
To stop during the process, press [INTRO] or [STOP
7
].
• This function does not work during any random/program mode.
CDs and MP3 – Play (Continued)
Album/Track title search A
1
2
3
4
5
•
•
N
•
•
•
•
•
•
•
•
U
T
m
N
•
•
•
•
PM21_7968-2Y_En.indd 8 PM21_7968-2Y_En.indd 8 3/18/05 11:58:48 AM 3/18/05 11:58:48 AM