RQTV0188
11
DAB operation
DAB operation
1
Press [TUNER/BAND] to enter DAB mode.
The unit comes on.
Note
“Scan Failed.” appears if no stations are memorized. If this occurs,
adjust the antenna and try Auto scanning or change the Auto scan
frequency range. (
➡
page 13)
2
Press [PLAY MODE] to select “STATION TUNE”.
Each time you press the button:
“STATION TUNE”
“PRESET TUNE”
3
Press [ /
4
] or [ /
¢
] to select a station.
The station name changes in alphanumeric order.
DAB Auto Scan
DAB Auto Scan
Press and hold [PLAY MODE] until “DAB Auto Scan”
appears.
When a frequency is tuned by Auto scanning on this unit,
the ensemble corresponding to the frequency is displayed
for approximately 2 seconds.
Note
• When updating memory with Auto scan, preset stations are not
erased or changed.
• When a frequency cannot be received, the previous memory is
restored.
• Total stations received is displayed for approximately 2 seconds.
Presetting
Presetting
Presetting channel
Up to 20 channels can be set.
1
Press [ /
4
] or [ /
¢
] to select a station.
2
Press [PROGRAM].
3
Press the numeric buttons to select a channel.
4
To preset more stations, press [PLAY MODE] to
select “STATION TUNE” and then repeat steps 1 to 3.
Note
You cannot preset stations when the station is not broadcasting or
when you are selecting a secondary service.
Selecting a preset channel
1
Press [PLAY MODE] to select “PRESET TUNE”.
2
Press [ /
4
] or [ /
¢
] or numeric buttons to
select a channel.
Numeric
buttons
NS55DB_EB_EN.indd 11
NS55DB_EB_EN.indd 11
4/2/07 12:15:49 PM
4/2/07 12:15:49 PM