
RQ
T9
98
3
Recording
This system can record up to 800 folders (maximum 999
tracks in an album) or a total of 8000 tracks, depending
on the available storage capacity of the internal memory
or the USB device in USB B .
To c h e c k storage space
In th e s to p mode, press [DISPLAY].
• “ UPDATE” is shown when the system is reading the
device.
• “ NO DEVICE” is shown if there is no USB device
connected to | USB B .
Note:
• All recordings are in “.mp3” format.
• You cannot do recording when you are using random
playback mode.
• The DJ function is switched off during recording.
• Repeat playback mode is cancelled during recording.
• A new album is added each time you do a recording.
• The sequence of album may change after the recording.
• The recordings are kept in a folder named “ REC_DATA” in
the USB device or the internal memory.
• USB status indicator blinks in red during USB recording.
Basic recording
1 S elect the source you w a n t to record.
C D-DA
Prepare the disc playback mode.
Record all
Select “ OFF PLAYMODE”
tracks
( Z “ Play menu”).
Record a
Select “ 1-TRACK” ( Z “ Play menu”).
specified
track
Make sure the disc is stopped.
Radio
Tune in to the radio station.
External equipm e nt
Connect and play the equipment
( Z “ External equipment”).
2 Press [MEMORY REC * / l l ] o r [USB REC * / l l ] to
s ta rt recording.
The name of the folder that keeps the recording is
shown.
Stop recording
Press [■ ]. “WRITING” is shown.
Pause
recording
Press [MEMORY REC 7/11] or
[USB R
e
C • / ! ! ] during recording.
Press again to continue recording.
Note:
You can pause during recording from the
radio, AUX 1 or AUX 2 (except in
“SYNCHRO” mode). A track mark is
added every time you pause ( Z “Adding
track marks”).
Note:
• Wait for a few seconds for the system to prepare the USB
device before you start recording.
• When the next track of the disc is being recorded, it will be
shown on the display.
| High-speed recording
CD-DA d isc recording speed:
CD, CD-R: Three times (3x) the normal speed.
CD-RW: Two times (2x) the normal speed.
1 Put in the d isc you w a n t to record.
2 Press [REC MODE] to se le ct “ NORMAL” or
“ HI-SPEED” and then press [OK].
3 Press [USB REC * / l l ] o r [MEMORY REC * / l l ] to
s ta rt recording.
Note:
• If you cannot record at high-speed because of the
condition of the disc, record at normal speed.
• The sound is muted during high-speed recording.
| Adding track marks
When recording from radio or external equipment, you
can divide tracks using various modes.
Before recording
Press [REC MODE] to select the mode.
MANUAL
Add a track mark manually.
Press [OK] during recording to add a
track mark.
SYNCHRO
(For AUX 1 or
A
u
X 2 source)
Recording starts automatically when
the other equipment starts to play.
Recording pauses when it detects
silence for 3 seconds.
TIMEMARK
A track is automatically divided at
5-minute intervals.
Note:
• During recording, if you press [OK] or pause recording
while using “TIME MARK” mode, the 5-minute counter is
reset.
• You cannot add track marks manually in “SYNCHRO”
mode.
12
i 2