20
VQT4E88
This system does not operate correctly.
If the HDMI cable is connected to the wrong
terminal (HDMI IN or HDMI OUT), this system will
not operate correctly. Turn this system off,
disconnect the AC mains lead and reconnect the
HDMI cable(s). (
>
9, 10)
VIERA Link related operations no longer
function properly.
≥
Check the VIERA Link setting on the connected
devices.
≥
Have you turned the VIERA Link settings off?
(
>
19)
≥
When the HDMI connections are changed,
after a power failure or after the AC mains lead
has been removed, VIERA Link operations may
not function properly.
j
Turn on all the devices that are connected to
the TV with an HDMI cable and then turn the
TV on.
j
Turn off the VIERA Link settings of the TV
and turn it on again. For details refer to the
operating instructions for the TV.
j
While this system and the TV are connected
with the HDMI cable, turn on the TV and then
remove the system’s AC mains lead and
reconnect it again.
The first few seconds of audio cannot be
heard when using the HDMI connection.
This may occur during DVD-Video chapter
playback. Change the digital audio output setting
on the connected device from “Bitstream” to
“PCM”.
When operating an HDMI compatible device
of a different brand, this system reacts in an
unwanted manner.
HDAVI Control commands may use a different
signal depending on the brand of the device. In
this case, turn VIERA Link off (
>
19).
No sound (or image).
≥
Turn muting off. (
>
14)
≥
Check the connections to the other devices.
(
>
9, 10)
≥
Make sure that the received audio signal is
compatible with this system. (
>
6)
≥
Turn this system off and then on again.
≥
If this system is connected to the TV with only
an HDMI cable, make sure that the TV’s HDMI
terminal is labelled “HDMI (ARC)”. If not,
connect using the optical digital audio cable.
(
>
9, 10)
≥
If this system is connected to a Panasonic TV
and turned on using the button on the active
subwoofer or the remote control, sound might
not be output from this system. In this case,
turn this system on using the TV’s remote
control. (
>
17)
≥
If the connections are correct, there might be a
problem with the cables. Redo the connections
with different cables.
≥
Check the audio output settings on the
connected device.
≥
If the BD/DVD indicator flashes and there is no
audio output, try the following.
1
Turn the connected device off and then on.
2
Turn off this system, remove the HDMI
cable, then reconnect the HDMI cable and
turn this system back on.
The dual audio cannot be changed from main
to secondary.
If the audio received from the connected device is
not “Dolby Dual Mono” or the output setting is not
“Bitstream”, the setting cannot be changed from
this system. Change the setting on the connected
device.
The volume is lowered when this system is
turned on.
If this system is turned off with the volume setting
in the greater half (above 50), this system will
automatically lower the volume to the middle (50)
when this system is turned on. (
>
19)
The dialog is too persistent or the dialog does
not sound natural.
This system has a function to make the dialog
stand out when the volume is low. (
>
19)
There is no audio.
This system turns off automatically.
(When this system detects a problem, a safety
measure is activated and this system
automatically switches to standby mode.)
≥
There is a problem with the amplifier.
≥
Is the volume extremely high?
If so, lower the volume.
≥
Is this system placed in an extremely hot
place?
If so, move this system to a cooler place and
wait a few moments and then try to turn it on
again.
If the problem persists, confirm the TV indicator
and AUX indicator blink, turn the system off,
remove the AC mains lead and consult your
dealer. Please be sure to remember the
indicators that were blinking and inform the
dealer.
HDMI
Sound
SC-HTE50EB_VQT4E88.book 20 ページ ２０１２年２月２４日 金曜日 午後７時５４分
