background image

32

RQT9904

[For]the]United]Kingdom]and]Ireland]

Declaration of Conformity (DoC)

Hereby, “

Panasonic Corporation

”  declares that this product is in compliance with the essential requirements and other relevant provisions 

of Directive 1999/5/EC.
Customers can download a copy of the original DoC to our R&TTE products from our DoC server:
http://www.doc.panasonic.de
Contact to Authorised Representative: Panasonic Marketing Europe GmbH,
Panasonic Testing Centre, Winsbergring 15, 22525 Hamburg, Germany

This product is intended for general consumer. (Category 3)

Disposal of Old Equipment and Batteries
Only for European Union and countries with recycling systems

These symbols on the products, packaging, and/or accompanying documents 
mean that used electrical and electronic products and batteries must not be mixed 
with general household waste.
For proper treatment, recovery and recycling of old products and used batteries, 
please take them to applicable collection points in accordance with your national 
legislation.
By disposing of them correctly, you will help to save valuable resources and prevent 
any potential negative effects on human health and the environment.
For more information about collection and recycling, please contact your local 
municipality.
Penalties may be applicable for incorrect disposal of this waste, in accordance with 
national legislation.

Note for the battery symbol (bottom symbol):
This symbol might be used in combination with a chemical symbol. In this case it 
complies with the requirement set by the Directive for the chemical involved.

SC-HTB880EB_RQT9904-B.book  32 ページ  2014年3月3日 月曜日 午前10時29分

Summary of Contents for SC-HTB880





































Reviews: