20
RQT0A97
For NFC-compatible Bluetooth
®
devices
(Android
TM
devices) only
Simply by touching an NFC (Near Field
Communication)-compatible Bluetooth
®
device on
the main unit, you can complete all preparations,
from registering a Bluetooth
®
device to
establishing a connection.
Preparation
≥
Turn on the NFC feature of the device.
≥
Android device version lower than 4.1 requires
the installation of the app “Panasonic Music
Streaming” (free of charge).
1
Enter “Panasonic Music Streaming” in the search
box of Google Play
TM
to search, and then select
“Panasonic Music Streaming”.
2
Start the app “Panasonic Music Streaming” on the
device.
– Follow on-screen instructions on your device.
– Always use the latest version of the app.
Press [ ] to select “BLUETOOTH”.
Touch and hold your device on the
NFC touch area of the main unit [ ].
(
>
6)
Do not move the Bluetooth
®
device until it beeps,
displays a message or reacts in some way.
Once the Bluetooth
®
device has reacted, move the
device away from the main unit.
≥
When the registration and connection of the
Bluetooth
®
device is complete, the name of the
connected device is indicated on the display for a few
seconds.
≥
The location of the NFC touch area differs depending
on the device. When a connection cannot be
established even if your Bluetooth
®
device has
touched the NFC touch area of the main unit, change
the position of the device. The condition may also
improve if you download the dedicated app
“Panasonic Music Streaming” and start it up.
Start playback on the Bluetooth
®
device.
≥
If you touch another device to the main unit, you can
update the Bluetooth
®
connection. The previously
connected device will be disconnected automatically.
≥
When the connection is established, playback may start
automatically depending on the type of device being used.
≥
The One-Touch Connection may not work properly
depending on the type of device being used.
Remote control code
When other Panasonic devices respond to this
system’s remote control, change the remote
control code on this system and the remote
control.
Preparation
≥
Turn off all other Panasonic products.
≥
Turn on the main unit.
∫
To set the code to “REMOTE 2”
Press and hold [MUTE] and [OK] for more than
4 sec.
“REMOTE 2” is indicated on the display.
∫
To set the code to “REMOTE 1”
Press and hold [MUTE] and [
4
] for more than
4 sec.
“REMOTE 1” is indicated on the display.
One-Touch Connection
(Connecting by NFC)
SC-HTB685_EGEB_RQT0A97-B.book 20 ページ ２０１５年１２月１日 火曜日 午後２時５４分
