Panasonic SC-HTB500PP, Service Manual

Page: 10 / 115

10
4 Specifications
Q
GENERAL
Power consumption: Main unit : 27 W
Digital transmitter : 1.2 W
Power consumption in standby mode: Main unit : Approx. 0.1 W
Power supply: AC 120 V, 60 Hz
Dimensions (W x H x D):
Main unit :
(Without wall mount bracket)
1029 mm x 108 mm x 58 mm (10 1/2” x 4 1/4” x 2 9/32”)
(With wall mount bracket) 1029 mm x 108 mm x 80 mm (10 1/2” x 4 1/4” x 3 5/32”)
Digital transmitter : 43.5 mm x 37.3 mm x 8.2 mm (1 23/32” x 1 15/32” x 5/16”)
Mass:
Main unit :
(Without wall mount bracket)
Approx. 2.8 kg (6.2 lbs)
(With wall mount bracket) Approx. 2.9 kg (6.4 lbs)
Digital transmitter : Approx. 0.0095 kg (0.0209 lbs)
Operating temperature range: 0
°
C to +40
°
C (+32
°
F to +104
°
F)
Operating humidity range: 20% to 80% RH (no condensation)
Q
AMPLIFIER SECTION
RMS Output Power
Front ch: 60 W per channel (4
Ω
), 1 kHz, 10% THD
Total RMS Dolby Digital mode power: 240 W
FTC Output Power
Front ch: 25 W per channel (4
Ω
), 120 Hz to 20 kHz, 1% THD
Total FTC Dolby Digital mode power: 87 W
Q
SPEAKER SECTION
FRONT SPEAKERS (BUILT-IN)
Type: 1 way 1 speaker system (Bass Reflex)
Full range: 6.5 cm (2 1/2”) Cone type x 2
Output sound pressure: 78 dB/W(1m)
Frequency range: 35 Hz to 180 Hz (-16dB)
40 Hz to 160 Hz (-10dB)
Q
TERMINAL SECTION
HDMI This unit supports “HDAVI Control 5” function.
HDMI input
Input Connector: Type A (19 pin)
HDMI AV output
Output Connector: Type A (19 pin)
Digital Audio Input (TV only)
Optical digital input: Optical terminal
Sampling frequency: 32 kHz, 44.1 kHz, 48 kHz
Audio Format: LPCM, Dolby Digital
IR Blaster
Terminal 1: 3.5 mm (1/8”) jack
Q
WIRELESS SECTION
Wireless module
Frequency range: 2.4 GHz to 2.4835 GHz
Number of channels: 3
Note:
1. Specifications are subject to change without notice.
2. Total harmonic distortion is measured by the digital spectrum analyzer.