5
T
Q
BJ
221
6
Overview of controls
Do the procedure with the remote control. You can also use the buttons on the main unit if they
are the same.
A
Standby/on switch
[
1
]
Press to switch the unit from on to standby
mode or vice versa. In standby mode, the unit
is still consuming a small amount of power.
B
Adjust the volume level (
~
18)
C
Select the input source
[HTB400]
[HTB600]
D
Select the Bluetooth
®
device as the source
(
~
17
)
To start Bluetooth
®
pairing, press and hold
[
].
E
Display panel
F
Remote control sensor
Point the remote control at the remote control
sensor, away from obstacles and within the
operation range.
Distance: Within approximately 7 m
Angle: Approximately 20° up and down, 30° left
and right
G
[HTB600]
WIRELESS LINK indicator (
~
17)
Note:
•
Do not place objects in front of this system.
•
Do not place objects on top of the main unit.
Do not block the top surface of the main unit for proper
ventilation.
•
Remove dust and dirt from this system regularly. (
~
23)
[HTB600]
Main Unit (Front)
Active subwoofer (Front)
TV
BT
TV
BT
HDMI
htb600.400_TQBJ2216_en.fm Page 5 Thursday, May 14, 2020 2:22 PM
