18
RQT9777
≥
For a safety measure to prevent the speakers from falling, refer to page 20.
≥
To prevent damage or scratches, lay down a soft cloth and perform the assembly on it.
Assemble the speakers following step 1 of “Place the speakers
vertically” (
>
14).
Insert the speaker cable through the speaker base and connect the
speaker cables.
≥
Be sure to insert the speaker cable through the threading hole as indicated in the illustration.
§
If you have difficulty inserting the cable, try straightening the speaker cable and then bending the
cable about 20 mm (
25
/
32
q
) from the tip, at an angle of approx. 45
o
(as illustrated above).
Place the speakers using the speaker
bases
∏
2 Speakers
∏
2 Speaker cables
WHITE: Left
RED: Right
∏
2 Stand necks
∏
2 Speaker bases
∏
4 Screws
1
Insert the wire fully.
r
: White
s
: Blue line
≥
Insert the wire fully, taking
care not to insert beyond
the wire insulation.
2
Press into the groove.
45
Push
SC-HTB370PPC_RQT9777-1P_mst.book Page 18 Tuesday, January 29, 2013 11:48 AM
