Getting started
15
VQT4E52
≥
For a safety measure to prevent the speakers from falling, refer to page 16.
≥
To prevent damage or scratches, lay down a soft cloth and perform the assembly on it.
Assemble the speakers following step 1 of “Place the speakers
vertically” (
>
12)
Assemble the speakers.
≥
To make sure that the speaker cable is connected to the correct speaker, match the colour of the speaker connector with
the colour of the L/R indicator on the speaker label so as not to connect the speaker cable to the wrong speaker.
≥
Be sure to insert the speaker cable through the threading hole as indicated in the illustration.
≥
Keep the screws out of reach of children to prevent swallowing.
≥
Insert the wire fully, taking care not to insert beyond the wire insulation.
(Continued on the next page)
Place the speakers using the speaker
bases
∏
1 Speaker (L)
∏
1 Speaker (R)
∏
2 Speaker
cables
(L): WHITE
(R): RED
∏
2 Speaker
bases
∏
6 Screws
∏
2 Front
ornaments
2
2
2
1
Screw
≥
Tighten securely.
Align the projecting parts with the
holes on the speaker.
Insert the wire
fully while pushing
the lever.
r
: White
s
: Blue line
Push
Thread the speaker cable.
To detach the speaker
HTB20EBEGGNGS~Body_mst.fm 15 ページ ２０１２年２月２９日 水曜日 午前８時４６分
