background image

21

RQT6840

You can record to a tape deck connected to TAPE REC (OUT), a VCR
connected to VCR OUT (SA-XR25), a DVD recorder/VCR connected to
DVR/VCR OUT (SA-XR45), or digital recording equipment connected to
DIGITAL OPTICAL OUT.
See the recording unit’s operating instructions for details on how to
prepare it for recording.

1. Press [INPUT SELECTOR] to select the source to

be recorded.

2. Begin recording.

Follow your recording unit’s operating instructions.

3. Start the source to be recorded.

Follow your equipment’s operating instructions.

¡

With a tape deck, you can record any analog source except TAPE.

¡

With a VCR, you can record any analog source except VCR 
(SA-XR25).

¡

With a DVD recorder/VCR, you can record any analog source except
DVR/VCR (SA-XR45).

¡

With digital recording equipment, you can record any digital source
without copy protection.

¡

When you select DVD 6CH INPUT mode, only sound from the front
left and right channels is recorded.

¡

Some sources do not allow digital recording. Connect through the
analog terminals and select “ANALOG” input.

Recording on other equipment

Making a recording

Sleep timer

The SLEEP timer can turn the unit off after a set time.
It does not control any other components.

1. Press [SLEEP].

SLEEP 

/

OFF

2.

Within 5 seconds

Press 

[

–/L] or [+/R] to select the required time.

The display changes as follows:

30 

,

/

60 

,

/

90 

,

/

120 (in minutes)

To check the setting
Press [SLEEP] once.

¡

The time remaining appears.

To change a setting
Repeat the procedure from the beginning.

,

Other functions

Tone

Balance

You can adjust the level of the bass and treble.

1. Press [TONE/BALANCE] to select “BASS” or

“TREBLE”.

2. Press [–/L] or [+/R] to adjust bass/treble.

For your reference

¡

To adjust the tone
The STEREO mode must be on and input must be either analog or
PCM signals. You cannot adjust the tone if DVD 6CH is selected.

You can adjust the balance of the front speakers.

1. Press [TONE/BALANCE] to select “BALANCE”.
2. Press [–/L] or [+/R] to adjust.

Others

Input mode

This unit automatically detects whether input is digital or analog, but you
can fix the input mode.

Press [INPUT MODE] to select “AUTO”, “ANALOG”
or “DIGITAL”.

INPUT MODE

STEREO/

2CH MIX

DOLBY

PRO LOGIC

NEO:6

SFC

SLEEP

TONE/

BALANCE

LEVEL

EFFECT

–/L

+/R

DISPLAY

DIMMER

SUBWOOFER

MUTING

TV/VIDEO

RETURN

-TEST/–SETUP

TONE/

BALANCE

INPUT MODE

–/L

+/R

INPUT MODE

STEREO/

2CH MIX

DOLBY

PRO LOGIC

NEO:6

SFC

SLEEP

TONE/

BALANCE

LEVEL

EFFECT

–/L

+/R

-TEST/–SETUP

SLEEP

–/L

+/R

Re-master 

This original Panasonic feature boosts the frequencies of the higher
harmonics that are lost during recording due to compression.

Press [MULTI-SOURCE DIGITAL RE-MASTER] to select
“EFFECT 1”, “EFFECT 2”, “EFFECT 3” or “EFFECT 4”.

When Re-master is on, the current level appears, then each time you
press the button:
EFFECT 1: for fast tracks (pop and rock)
EFFECT 2: for tracks with a variety of tempos (jazz)
EFFECT 3: for slow tracks (classical)
EFFECT 4: for compressed audio signals
OFF: the re-master processing is off.

FM MODE

INPUT SELECTOR

MEMORY

VOLUME

PHONES

DOWN

UP

PRESET TUNE 

2

TUNE 

1

BAND

MULTI-SOURCE

DIGITAL RE-MASTER

ENHANCED

SURROUND

MULTI-SOURCE

DIGITAL RE-MASTER

POWER 

8

DTS

DTS-ES

NEO:6

FM MODE

INPUT SELECTOR

MEMORY

VOLUME

PHONES

DOWN

UP

PRESET TUNE 

2

TUNE 

1

%

 DIGITAL

%

 DIGITAL EX

%

 PL

2

^

DTS 96/24

INPUT SELECTOR

BAND

MULTI-SOURCE

DIGITAL RE-MASTER

ENHANCED

SURROUND

SA-XR45

Summary of Contents for SC-HT425D

























Reviews: