Panasonic SC-HM910, Service Manual

Page: 21 / 104

SC-HM910/SC-HM810
21
Step 12 Squeeze the shaft of lower hook, and then draw it.
Step 13 Rotate the lower spindle in the direction of arrow until
the lower spindle interferes with stopper.
Step 14 Insert the thin tip of minus screwdriver between the
lower spindle and UP/DOWN base, and then slacken
the lower spindle to release the stopper. Then, rotate
the lower spindle and remove it.
Step 15 Rotate the UP/DOWN base at a 90 angle. Then, spread
the hold bars of loading stopper and remove the UP/
DOWN base.
Step 2 Lower the loading stopper ass’y, and then align the
lower spindle with the trapezoid tooth of relay gear A.
Step 3 Force the loading stopper ass’y, latch the claw firmly.
(Reassembly for mechanism base drive unit)
(Installation for loading stopper ass’y)
Step 1 Align the claw of loading stopper ass’y with the slot of
spindle base. (Caution should be exercised when align-
ment of claw due to the size of claws.)