Panasonic SC-HC58 Owner'S Manual Download Page 20

20

RQT9754

Cannot connect to the unit

Display the wireless network name that this unit is 
connected to and make sure that the device is 
connected to the same network. (

l

8)

If “NET STNBY” is set to “OFF”, the AirPlay compatible 
device cannot be connected when this unit is off.

Turn off the Wi-Fi setting on the AirPlay compatible 
device, set “NET STNBY” to “OFF” (

l

18) and then turn 

this unit off and on. Reconnect the compatible device to 
the Wi-Fi network and then select this unit as the AirPlay 
speakers again.

My wireless network router is WPS PBC 
compatible, but the pairing does not work.

If the network is set to be invisible, the push button 
configuration does not work. In this case, either make 
the wireless network visible while you set up the network 
for this unit or use “Method 1” or “Method 3”. (

l

8, 9)

Playback does not start
The sound is interrupted

Simultaneous use with other 2.4 GHz devices, such as 
microwaves, cordless telephones, etc., may result in 
connection interruptions.
Increase the distance between this unit and these 
devices.

Do not place this unit inside a metal cabinet, for it might 
block the Wi-Fi signal.

Place this unit closer to the wireless network router.

If “D.CONNECT” is set to “ON”, place the AirPlay 
compatible device closer to this unit.

If several wireless devices are simultaneously using the 
same wireless network as this unit, try turning off the 
other devices or reducing their wireless network usage.

If the playback stops, check the playback status on the 
iOS device or iTunes.

If play does not start (even though the Wi-Fi status 
indicator lights in blue and the AirPlay 

 icon is 

displayed), restart the wireless network router, turn the 
Wi-Fi connection on the iOS device or Mac/PC off and 
on, and then make sure that your home wireless network 
is selected.

If the AirPlay 

 icon is not displayed even if Wi-Fi 

status indicator lights in blue, try restarting the wireless 
network router.

With some iOS and iTunes versions, it may not be 
possible to restart the AirPlay playback if the selector is 
changed (e.g., “CD”) or the unit is turned off, during the 
AirPlay playback.
In this case, select a different device from the AirPlay 
icon of the Music App or iTunes and then re-select this 
unit as the output speakers. (

l

11)

Pairing cannot be done.

Check the Bluetooth

®

 device condition.

The device cannot be connected.

The pairing of the device was unsuccessful or the 
registration has been replaced. Try pairing the device 
again. (

l

13)

This unit might be connected to a different device. 
Disconnect the other device and try pairing the device 
again. (

l

13)

The device is connected but audio cannot be 
heard through this unit.

For some built-in Bluetooth

®

 devices, you have to set the 

audio output to “SC-HC58” manually. Read the operating 
instructions for the device for details.

The sound is interrupted.

The device is out of the 10 m (33 ft) communication 
range. Bring the Bluetooth

®

 device closer to this unit.

Remove any obstacle between this unit and the device.

Other devices that use the 2.4 GHz frequency band 
(wireless router, microwaves, cordless phones, etc.) are 
interfering. Bring the Bluetooth

®

 device closer to this unit 

and distance it from the other devices.

Select “MODE1” for stable communication. (

l

13)

The remote control doesn't work properly.

The remote control and this unit are using a different 
code. (

l

21, “REMOTE ”)

Is the battery depleted or is the battery inserted 
incorrectly? (

l

5)

The following messages or service numbers 
may appear on the unit's display.

“--:--”

You plugged the AC power supply cord in for the first 
time or there was a power failure recently. Set the time 
(

l

16).

“ADJUST CLOCK”

Clock is not set. Adjust the clock accordingly.

“ADJUST TIMER”

Play timer is not set. Adjust the play timer accordingly.

“AUTO OFF”

The unit has been left unused for about 30 minutes and 
will shut down within a minute. Press any button to 
cancel it.

Bluetooth

®

Remote control

Messages

SC-HC58~RQT9754.book  Page 20  Tuesday, December 18, 2012  4:40 PM

Summary of Contents for SC-HC58

































Reviews: