62
10 Service Position
Note: For description of the disassembly procedures, see the Section 9
10.1. Checking and Repairing Main
P.C.B.
•
Checking & Repairing Main P.C.B. (Side A)
Step 1 :
Remove CD Door Unit.
Step 2 :
Remove Net Frame.
Step 3 :
Remove Top Ornament.
Step 4 :
Remove Bottom Ornament.
Step 5 :
Remove Front Panel Block.
Step 6 :
Insert a CD into the CD tray.
Step 7 :
Use tape to keep the Switch depressed.
Step 8 :
Remove 2 screw.
Step 9 :
Lift up and flip over the SMPS Unit.
Step 10 :
Check and repair Main P.C.B. (Side A) according to
the diagram shown.
Caution : Take extra care not to damage the ground wire
connected to the SMPS Unit during disassembling.
