14
RQT9941
Others
As a factory default, this unit will turn to standby mode
automatically if there is no sound and it is not being
used for approximately 20 minutes.
To cancel this function
1
Press [SETUP] repeatedly to select “AUTO OFF”.
2
Press [
3
,
4
] to select “OFF” and then press [OK].
≥
To turn the function on, select “ON” in step 2.
≥
When connected to a Bluetooth
®
device, the function does
not work.
When “SC-HC39” is selected from a paired Bluetooth
®
device’s Bluetooth
®
menu, this unit will turn on
automatically from standby mode and establish a
Bluetooth
®
connection.
1
Press [SETUP] repeatedly to select “BLUETOOTH
STANDBY”.
2
Press [
3
,
4
] to select “ON” and then press [OK].
≥
To turn the function off, select “OFF” in step 2.
When other Panasonic equipment responds to the
supplied remote control, change the remote control
code.
1
Press [USB/CD] to select “CD”.
2
While pressing and holding [SELECTOR] on the
unit, press and hold [USB/CD] on the remote
control until the unit’s display shows “REMOTE 2”.
3
Press and hold [OK] and [USB/CD] on the remote
control for at least 4 seconds.
≥
To change the mode back to “REMOTE 1”, press [USB/CD]
to select “CD” and then repeat the step 2 and 3 but replace
[USB/CD] with [
].
Occasionally, Panasonic may release updated
software for this unit that may add or improve the way
a feature operates. These updates are available free of
charge.
For more details, refer to the following website.
http://panasonic.jp/support/global/cs/
(This site is in English only.)
∫
Checking the software version
The version of the installed software is displayed.
Press [SETUP] repeatedly to select “SW VER.” and
then press [OK].
≥
Press [OK] to exit.
Auto off function
≥
This setting cannot be selected when “DAB/DAB+” or “FM” is
the source.
Bluetooth
®
standby
Changing the unit and remote
control code
Software update
SC-HC39DBEB~RQT9941-B.book 14 ページ ２０１４年３月２７日 木曜日 午前９時５２分
