Panasonic SC-HC05GN, Service Manual, Page: 21 / 69

21
6 Disassembly and Assembly Instructions
Caution Note:
• This section describes the disassembly and/or assembly procedures for all major printed circuit boards & main compo-
nents for the unit. (You may refer to the section of “Main components and P.C.B Locations” as described in the service
manual)
• Before carrying out the disassembly process, please ensure all the safety precautions & procedures are followed.
• During the disassembly and/or assembly process, please handle with care as there may be chassis components with
sharp edges.
• Avoid touching heatsinks due to its high temperature after prolong use. (See caution as described below)
• During disassembly and assembly, please ensure proper service tools, equipments or jigs is being used.
• During replacement of component parts, please refer to the section of “Replacement Parts List” as described in the ser-
vice manual.
• Select items from the following indexes when disassembly or replacement are required.
• Disassembly of Stand Unit
• Disassembly of Net Frame Assembly
• Disassembly of Front Panel Block
• Disassembly of iPod Block
• Disassembly of Latch
• Replacement of Damper
• Disassembly of iPod Cradle
• Disassembly of Dock P.C.B. and LED P.C.B.
• Replacement of iPod Cover
• Disassembly of Lever Lock
• Disassembly of Release Button Assembly
• Disassembly of SMPS Unit
• Disassembly of SMPS P.C.B.
• Disassembly of Top Ornament Assembly
• Disassembly of SW/IR/Power-LED P.C.B. and Power Button
• Disassembly of Audio P.C.B.
• Disassembly of Line Filter P.C.B. and AC-In P.C.B.
• Disassembly of Main P.C.B.
• Disassembly of Passive Radiator (SP6)
• Disassembly of Front Speaker (SP2)
• Disassembly of Piezo Unit (SP8)
• Disassembly of Passive Radiator (SP4)
• Disassembly of Passive Radiator (SP5)
• Disassembly of Front Speaker (SP1)
• Disassembly of Piezo Unit (SP7)
• Disassembly of Passive Radiator (SP3)