11
RQT0A52
EN
GL
IS
H
Sound and illumination
effects
The following sound effects can be added to the
audio output.
1
Press [SOUND] repeatedly to select the sound
effect.
2
Press [
3
,
4
] to select the setting and then
press [OK].
≥
You may experience a reduction in sound quality when these
effects are used with some sources. If this occurs, turn the
sound effects off.
By the unit only
You can change the illumination colour on the unit.
Turn [ILLUMINATION/CONTROL].
To cancel, select “OFF”.
Recording (
[USB]
,
[AUX]
)
You can record:
≥
MP3 tracks via
[USB\A]
to
[USB\B]
.
≥
audio via AUX IN 1 or AUX IN 2 to
[USB\B]
.
Preparation
≥
Connect a USB device to
[USB\B]
for storing
recordings.
≥
Prepare the source you want to record.
– Connect a USB device to
[USB\A]
or connect the external
equipment.
1
Select the source you want to record.
(“USB A”, “AUX 1” or “AUX 2”).
2
Press [USB REC
¥
/
;
] on the unit to start
recording.
≥
[AUX]
Start playback on the external equipment.
e.g.: Recording from
[USB\A]
[USB]
≥
If you stop recording before the end of a track, the affected
track will not be stored. Only fully recorded tracks will be
stored.
(
“NO FILE RECORDED” is indicated if no track is recorded.)
≥
You can record in selected playback modes (except random
and repeat modes). (
l
10)
[AUX]
≥
A track mark is added every time recording is paused. You
can also add track marks in other ways. (
l
12)
∫
To check storage capacity
In the stop mode, press [DISPLAY] once.
The available storage space or the remaining
recording time of the USB device in
[USB\B]
will be
indicated.
≥
“UPDATE” is indicated when the unit is reading the device.
≥
If there is no USB device in
[USB\B]
, “NODEVICE” is
indicated for a few seconds.
Sound effects
PRESET EQ
Select the desired preset EQ
setting.
≥
Select “FLAT” to turn preset EQ off.
Using the unit
Press [
PRESET EQ].
BASS
j
4 to
i
4
MID
TREBLE
INPUT
LEVEL
(For “AUX 2”
source)
“NORMAL” or “HIGH”
≥
Select “NORMAL” if the sound is distorted
during “HIGH” input level.
SUPER
WOOFER
“SW1”, “SW2”, “SW3” or “OFF”
Using the unit
1
Press and hold
[D.BASS, -SUPER WOOFER]
to show the current setting.
2
Press [
:
/
6
] or [
5
/
9
]
to adjust the setting.
D.BASS
“D.BASS BEAT”, “D.BASS OFF” or
“D.BASS ON”
Using the unit
Press [D.BASS, -SUPER WOOFER].
≥
D.BASS BEAT: This function emphasises
the attack level of the drum beat and
produces a punchy sound. Depending on
the track, the effect may be small.
Illumination settings
Stop
recording
Press [
∫
].
≥
“WRITING” is indicated.
Pause
recording
(
[AUX]
)
Press [USB REC
¥
/
;
] on the unit
during recording. (
“
” blinks.)
Press again to continue recording.
You cannot do this in “SYNCHRO” mode.
(
l
12)
Album being recorded
Percentage of the
recording process
REC
11
SC-CMAX5_E~RQT0A52-R.book 11 ページ ２０１５年６月１２日 金曜日 午前１１時２２分
