49
Referen
c
e
VQT4Q15
Cannot charge or operate.
¾
Check that the iPod/iPhone is connected
firmly. (
>
28)
¾
[BTT880]
When iPod/iPhone devices are
connected to both the USB port and the Dock,
disconnect both of them, and then connect
only the one you want to play back.
¾
The battery of the iPod/iPhone is depleted.
Charge the iPod/iPhone, and then operate
again.
¾
When unexpected operation occurs while
using the iPod/iPhone, connect the iPod/
iPhone again or try to restart the iPod/iPhone.
Distorted sound or noise is heard.
¾
Adjust the position of the antenna.
A beat sound is heard.
¾
Try to keep a certain amount of distance
between the antenna and the TV.
Noise is excessive.
¾
Change the audio to be output as monaural.
Press [AUDIO] to select “MONO”.
The sound becomes monaural.
≥
To cancel, press the button again or change
the frequency.
In normal circumstances, select “AUTO STEREO”.
The wireless link indicator is flashing.
¾
There is no link between the main unit and the
wireless system. Turn the wireless system off
and then back on. Alternatively, turn the
wireless system off, disconnect the AC mains
lead and then reconnect it.
The wireless link indicator does not light.
¾
Check that the main unit is turned on, and the
wireless system is turned on.
¾
Ensure that the digital transmitter is fully
inserted into the slot of the main unit. (
>
17)
The wireless link indicator keeps flashing
between red and green.
¾
There is a power supply problem. Consult the dealer.
I can’t connect to the network.
¾
Confirm the network connection and settings.
(
>
18, 20, 40)
¾
There may be obstacles that prevent the unit
from detecting your home network. Bring the
unit and the wireless router closer to each
other.
¾
Check the operating instructions for each
device and connect accordingly.
When using wireless LAN connection, video
from the DLNA Certified media server is not
played back or video frames are dropped
during playback.
¾
Higher transfer rate router such as 802.11n
(2.4 GHz) wireless router may solve the
problem. If you use 802.11n (2.4 GHz)
wireless router, it is necessary to set the
encryption type to “AES”.
Simultaneous use with a microwave, cordless
telephone etc. at 2.4 GHz may result in
connection interruptions or other problems.
¾
On the “Wireless Settings” screen (
>
40), the
continuous lighting of at least 4 “Reception”
indicators is the target for a stable connection. If
3 or fewer indicators are lit or the connection is
being interrupted, change the position or angle
of your wireless router and see if the connection
state improves. If there is no improvement,
connect to a wired network and perform the
“Easy Network Setting” (
>
20) again.
iPod/iPhone operation
Radio
[BTT880]
Wireless system
(SH-FX71)
Network
SC-BTT880&480&460&400&300GNGSGA-VQT4Q15_mst.book 49 ページ ２０１２年１２月４日 火曜日 午後３時５０分
