42
VQT5F80
The wireless link indicator does not light.
¾
Ensure the AC mains lead is connected
properly.
Pairing cannot be done.
¾
Disconnect and reconnect the AC mains lead
of the main unit and the wireless system, and
do pairing again. (
>
31, “Wireless System
Pairing”)
Cannot play.
¾
You inserted an incompatible disc.
Cannot play on this unit.
¾
You tried to play a non-compatible image.
¾
Re-insert the media.
No disc inserted.
¾
The disc may be upside down.
$
This operation is not available.
¾
Some operations are unsupported by the unit.
(For example, reverse slow motion, etc.)
IP address is not set.
¾
The “IP Address” in “IP Address / DNS
Settings” is “---. ---. ---. ---”. Set the “IP
Address”, “Subnet Mask”, and “Gateway
Address”. (Select the automatic address
acquisition if necessary.)
The wireless access point currently has a low
network security setting. It is recommended to
change to a higher setting.
¾
Set a stronger network security level referring
to the wireless router operating instructions.
NET
¾
While connecting to a network.
NO PLAY
¾
There is a viewing restriction on a BD-Video
or DVD-Video. (
>
33)
¾
The media is dirty or badly scratched. The
unit cannot play.
PLEASE WAIT
¾
The unit is carrying out internal process. This
is not a malfunction. You cannot operate the
unit while “PLEASE WAIT” is displayed.
REMOVE
¾
The USB device is drawing too much power.
Remove the USB device.
U59
¾
Temperature of this unit is hot and the unit
switches to standby for safety reasons. Wait
for about 30 minutes until the message
disappears.
Install or place this unit with good ventilation.
H
or F
(“
” stands for a number.)
¾
Check and correct the speaker cable
connections.
¾
There is something unusual.
¾
Check the unit using the troubleshooting
guide. If the service number remains
displayed, do the following.
If the service number remains displayed despite
doing the above, request service from the dealer.
Inform the dealer of the service number when
requesting service.
Wireless system
Messages on the screen
Messages on the unit’s
display
1
Disconnect the plug from the household
mains socket, wait a few seconds, then
reconnect it.
2
Press [
Í
/I] to turn the unit on.
SC-BTT885&505EB-VQT5F80_mst.book 42 ページ ２０１４年２月６日 木曜日 午後７時１４分
