38
VQT4R78
Speaker installation
option
Consult a qualified building contractor when
attaching the speakers to a wall. Improper
attachment may result in damage to the wall and
speakers and personal injury.
You can attach all of the speakers (except
subwoofer) to a wall.
≥
The wall or pillar on which the speakers are to
be attached should be capable of supporting
10 k
g
per screw.
1
Drive a screw (not supplied) into the wall.
A
At least 30 mm
B
‰
4.0 mm
C
‰
7.0 mm to
‰
9.4 mm
D
Wall or pillar
E
5.5 mm to 7.5 mm
2
Fit the speaker securely onto the screw(s)
with the hole(s).
Use the measurements indicated below to identify
the screwing positions on the wall.
≥
Leave at least 20 mm of space above the
speaker and 10 mm on each side to allow
enough space for fitting the speaker.
Front speaker
Front speaker
1
Thread a string to the speaker.
≥
Use a string of less than
‰
2.0 mm, which is
capable of supporting over 10 k
g
.
A
String (not supplied)
B
Rear of the speaker
2
Thread a string from the wall to the
speaker and tie tightly.
C
Screw eye (not supplied)
D
Wall or pillar
E
Approx.120 mm
Attaching to a wall
DO NOT
DO
≥
In this position, the
speaker will likely fall if
moved to the left or right.
≥
Move the speaker so
that the screw is in this
position.
A
40 mm
B
41 mm
To prevent falling of the
speakers
SC-BTT100EB-VQT4R78_mst.book 38 ページ ２０１２年１２月２１日 金曜日 午前９時３７分
