Panasonic SC-ALL2GN Operating Instructions Manual Download Page 59

Page: 59 / 60

- 59 -

Sales and Support Information

Customer Communications Centre

≥

For customers within the UK: 0344 844 3899

≥

For customers within Ireland: 01 289 8333

≥

Monday – Friday 9:00 am – 5:00 pm (Excluding public holidays).

≥

For further support on your product, please visit our website:

www.panasonic.co.uk

Direct Sales at Panasonic UK

≥

Order accessory and consumable items for your product with ease

and confidence by phoning our Customer Communications Centre

Monday – Friday 9:00 am – 5:00 pm (Excluding public holidays).

≥

Or go on line through our Internet Accessory ordering application at

www.pas-europe.com.

≥

Most major credit and debit cards accepted.

≥

All enquiries transactions and distribution facilities are provided

directly by Panasonic UK.

≥

It couldn't be simpler!

≥

Also available through our Internet is direct shopping for a wide range

of finished products. Take a browse on our website for further details.

For the United Kingdom and Ireland customers

Summary of Contents for SC-ALL2GN





























































Search results

Summary of Contents for SC-ALL2GN

Reviews:

Related manuals for SC-ALL2GN

Brands by name

Popular brands

Panasonic SC-ALL2GN, Operating Instructions Manual

Search results

Summary of Contents for SC-ALL2GN

Reviews:

Related manuals for SC-ALL2GN

Brands by name

Popular brands