Panasonic SC-ALL2 Operating Instructions Manual Download

Page: 49 / 60

- 49 -

Pairing cannot be done.

≥

Check the Bluetooth

device condition.

The device cannot be connected.

≥

The pairing of the device was unsuccessful or the registration has been

replaced. Try pairing the device again. (

30)

≥

This system might be connected to a different device. Disconnect the

other device and try pairing the device again.

The device is connected but audio cannot be heard through this

system.

≥

For some Bluetooth

devices, you have to set the audio output to

“SC-ALL2” manually. Read the operating instructions for the device for

details.

Connection is interrupted.

Sound is interrupted/sound skips/there is a lot of noise.

≥

Remove any obstacle between this system and the device.

≥

Other devices that use the 2.4 GHz frequency band (wireless router,
microwaves, cordless phones, etc.) are interfering. Bring the Bluetooth

device closer to this system and distance it from the other devices.

≥

Select “Ll: 1” for stable communication. (

33)

If the above does not fix the problem, you may be able to fix the problem
by reconnecting this unit and the Bluetooth

device. (

31)

Bluetooth

Summary of Contents for SC-ALL2





























































Search results

Summary of Contents for SC-ALL2

Reviews:

Related manuals for SC-ALL2

Brands by name

Popular brands

Panasonic SC-ALL2, Operating Instructions Manual

Search results

Summary of Contents for SC-ALL2

Reviews:

Related manuals for SC-ALL2

Brands by name

Popular brands