RQT5324
23
Recording from radio broadcasts
Preparation:
Insert the tape to be recorded on into deck 2.
Tape direction is automatically set to “ ”.
Change the tape direction if you want to start recording from the re-
verse side. (
page 22)
1. Select a radio station.
(
page 15, steps 1 – 3)
2. Press [REV MODE] to select the reverse mode.
Every time you press the button;
: One side is recorded, then recording stops automatically.
,
: Both sides (front side
reverse side) are recorded,
then recording stops automatically.
3. Press [ REC/STOP] to start recording.
If you selected
in step 2, the direction will automatically
change to
when recording starts.
To stop recording
Press [ REC/STOP] again.
Recording can also be stopped by pressing [ ].
To cut an unnecessary part while recording
1. Press [ REC/STOP] during the unnecessary part. The cassette
deck will stop.
2. Press [ REC/STOP] to resume recording again. Recording will
continue in the same direction as before.
Note
When recording an AM broadcast, sound is momentarily interrupted
when you start and stop the recording.
Press [
, FM MODE/BP] while recording.
Each time you press the button, “BP1” and “BP2” will be displayed al-
ternately.
Select the position where there is less noise.
2
3
Tape direction
2
FM MODE/BP
3
To reduce noise while AM recording
(Beat proof function)
Recording operation
