18
Step 3 :
Remove SMPS Module P.C.B.as arrow shown.
Caution : During assembling, ensure the SMPS Module
P.C.B. is seated properly onto the locators.
7.9.
Disassembly of Digital
Receiver (RX) Module P.C.B.
• Refer to “Disassembly of Amp Module Assembly”.
Step 1 :
Release the P.C.B. Holders slightly outwards as
arrows shown.
Step 2 :
Detach the Digital Receiver (RX) Module P.C.B. at the
D-Amp P.C.B. connector (CN1000).
Caution : During assembling, ensure the Digital Receiver
(RX) Module P.C.B. is properly and fully inserted onto the
D-Amp P.C.B. connector (CN1000).