RQT6905
4
Connections
Connect to a receiver or amplifier (
) with 6-
Ω
impedance for the
front, center, and surround speakers, and a pin-type output terminal
for an active subwoofer.
Before connection
Turn off the other equipment.
Do not connect the AC mains lead until all other cables and cords
are connected.
Twist off the vinyl tip.
Front, center, and surround speakers
Connect the front (
,
) and center speakers (
) with the 4-meter
cables (
) and the surround speakers (
,
) with the 10-meter
cables (
).
Be sure to connect only positive (copper) wires to positive (+) termi-
nals and negative (silver) wires to negative (-) terminals.
Never short-circuit positive (+) and negative (-) speaker wires.
Subwoofer
Connect with the included monaural connection cable
(
) to the receiver or amplifier’s subwoofer output
terminal.
BE SURE TO READ THE CAUTION FOR THE AC MAINS LEAD
ON PAGE 2 BEFORE PROCEEDING TO STEP 2.
Connect the AC mains lead (
) to the household mains
socket (
).
;
;;
;
;
30
°
120
°
30
°
SB-PC50
SB-FS50
SB-FS50
SB-FS50
SB-PC50
SB-FS50
SB-FS50
SB-FS50
SB-WA55
SB-FS50
SB-PC50
SB-WA55
SB-FS50
SB-FS50
Location
Front speaker (Left)
(SB-FS50)
Center speaker
(SB-PC50)
Front speaker (Right)
(SB-FS50)
Surround speaker (Right)
(SB-FS50)
Surround speaker (Left)
(SB-FS50)
Active subwoofer
(SB-WA55)
The front, center, and surround speakers should be placed at ap-
proximately the same distance from the listening position. The angles
in the diagram are approximate.
How you set up your speakers can affect the bass and the sound
field. Note the following points.
•
Place on flat, level secure bases.
Use spacers or a similar item to stop them from rocking.
•
Placing speakers too close to walls, and corners can result in ex-
cessive bass.
•
Cover walls and windows with thick curtain.
•
Do not place anything on top of the subwoofer.
