3.4.
Replacement of Speaker Connector Housing
3.4.1.
Disassembly
Step 1:
Use a paper clip push the Speaker Wire head until it
hide inside the Speaker Connector Housing.
Step 2:
Pull out the (+) and (-) speaker wire.
3.4.2.
Assembly
Cautions: Follow the following procedure during assem-
ble.
Step 1:
Slightly push up the speaker wire head approximately
45
q
as shown.
Step 2:
Insert the (+) speaker wire into the (+) hole of the
Speaker Connector Housing.
Note:
Push in the speaker wire until hear the “click” sound.
Step 3:
Insert the (-) speaker wire into the (-) hole of the
speaker connector housing.
Note:
Push in the speaker wire until hear the “click” sound.
Step 4:
Pull both speaker wires gently to ensure they lock-in
firmly.
Note:
Repeat step1 to 3 if the speaker wires come out.
8
