Panasonic SAPM41 - MINI HES W/CD PLAYER, Operating Instructions Manual

Page: 12 / 20

12
RQT8038
Cassette tape – Play and record
Recording CDs Recording CDs
1 Insert the cassette to be recorded on.
""
Insert inside the
guides
Forward side
2 Press [CD
6
] and then [STOP
7
, –DEMO].
3 Press [
0
OPEN/CLOSE] to insert the CD.
Press again to close.
4 Press [PLAY MODE] to select your desired mode
(refer page 7).
5 Press [
¶
REC/
8
] to start recording.
Recording programmed tracks Recording programmed tracks
1
Program the tracks you want (refer page 9).
2
Press [
¶
REC/
8
] to start recording.
Other basic operations Other basic operations
To Action
erase a recorded
sound 1) Insert the cassette to be recorded on.
2) Press [TAPE
3
] and then [CLEAR
7
].
3) Press [
¶
REC/
8
].
stop recording Press [CLEAR
7
].
stop recording
temporarily 1) Press [
¶
REC/
8
].
2) Press again to resume recording.
to record on the
other side of the
tape Turn the cassette over and press
[
¶
REC/
8
].
Erasure prevention Erasure prevention
The illustration shows how to remove the tabs to prevent
recording. To record on the tape again, cover as shown.
Side A
Tab for side A Tab for side B
To re-record
Normal tape
Adhesive tape
Basic play Basic play
1 Press [OPEN
0
] on top of the unit.
2
Insert a cassette.
""
Insert inside the
guides
Forward side
3 Close the lid by hand.
4
Press
[
TAPE
3
]
to start play.
To play the other side of the cassette, turn the cassette
over.
To Action
stop tape playback Press [CLEAR
7
].
start one touch play Press [TAPE
3
] when the system is OFF
with the cassette loaded.
fast-forward and
rewind Press [ 4 /REW/
4
] or [ 3 /FF/
¢
] in the
stop mode.
TPS (Tape Program Sensor) TPS (Tape Program Sensor)
This function enables you to search the beginning of a track,
up to a maximum of 9.
Press [ 4 /REW/
4
] or [ 3 /FF/
¢
] during play.
Play resumes from the track found.
TPS may not function properly with:
• Short silent parts
• Noise occurs between tunes
• Silent parts found within tunes
Before recording Before recording
Preparation
Wind up the leader tape so that recording can begin
immediately.
• Use normal position tape.
• High position and metal position tape can be used, but this unit will
not be able to record or erase them correctly.
Recording the radio Recording the radio
1
Insert the cassette to be recorded on.
2 Tune to the required station (refer page 13).
3 Press [
¶
REC/
8
] to start recording.
/0%.
Top of the unit
Cassette lid
PM41_8038-2P.indd 12 PM41_8038-2P.indd 12 2/22/05 5:25:13 PM 2/22/05 5:25:13 PM