RQT7533
16
ENGLISH
Specifications
AMPLIFIER SECTION
PL
PMPO
1400 W
FTC output power
THD 10%, both channels driven
60 Hz–16 kHz
60 W per channel (6
Ω
)
Total FTC power
120 W
RMS output power
THD 10%, both channels driven
1 kHz
80 W per channel (6
Ω
)
Total RMS power
160 W
Input sensitivity
AUX
250 mV
Input Impedance
AUX
13.3 k
Ω
AMPLIFIER SECTION
GCP
RMS output power
THD 10%, both channels driven
1 kHz
80 W per channel (6
Ω
)
Total RMS power
160 W
Input sensitivity
AUX
250 mV
Input Impedance
AUX
13.3 k
Ω
CASSETTE DECK SECTION
Track system
4 track, 2 channel
Heads
Record/playback
Solid permalloy head
Erasure
Double gap ferrite head
Motor
DC servo motor
Recording system
AC bias 100 kHz
Erasing system
AC erase 100 kHz
Tape speed
4.8 cm/s
Overall frequency response
(+3 dB, –6 dB at DECK OUT)
NORMAL (TYPE I)
35 Hz – 14 kHz
S/N
50 dB (A weighted)
Wow and flutter
0.18% (WRMS)
Fast forward and rewind time
Approx. 120 seconds with
C-60 cassette tape
CD SECTION
Sampling frequency
44.1 kHz
Decoding
16 bit linear
Beam source/wavelength
Semiconductor laser/780 nm
Number of channels
Stereo
Frequency response
20 Hz–20 kHz (+1, –2 dB)
Wow and flutter
Below measurable limit
Digital filter
8 fs
D/A converter
MASH (1 bit DAC)
MP3
Bit rate
32 kbps–320 kbps
Sampling frequency
32 kHz, 44.1 kHz, 48 kHz
AM TUNER SECTION
PL
Frequency range
520 – 1710 kHz (10 kHz steps)
GCP
Frequency range
522 – 1629 kHz (9 kHz steps)
520 – 1630 kHz (10 kHz steps)
Sensitivity
PL
S/N 20 dB (at 1000 kHz)
560
µ
V/m
GCP
S/N 20 dB (at 999 kHz)
560
µ
V/m
SPEAKER SECTION
Type
2 way, 2 speaker system
Speaker(s)
Woofer
16 cm cone type
Tweeter
6 cm cone type
Impedance
6
Ω
Input power (IEC)
80 W (Max)
Output sound pressure level
81 dB/W (1.0 m)
Cross over frequency
4 kHz
Frequency range
35 Hz–28 kHz (–16 dB)
50 Hz–26 kHz (–10 dB)
Dimensions (WxHxD)
220 x 330 x 207 mm
Mass
2.7 k
g
GENERAL
Power supply
PL
AC 120 V, 60 Hz
GCP
AC 110/127/220–230/240 V, 50/60 Hz
Power consumption
PL
165 W
GCP
179 W
Dimensions (WxHxD)
250 x 330 x 363 mm
Mass
PL
7.3 k
g
GCP
7.5 k
g
Power consumption in standby mode
PL
0.34 W
GCP
0.85 W
Note
1. Specifications are subject to change
without notice.
Mass and dimensions are approximate.
2. Total harmonic distortion is measured by
the digital spectrum analyzer.
Matsushita Electric Industrial Co., Ltd.
Web Site:
http://www.panasonic.co.jp/global/
FM TUNER SECTION
PL
Frequency range
87.9 – 107.9 MHz (200 kHz steps)
87.5 – 108.0 MHz (100 kHz steps)
GCP
Frequency range
87.50 – 108.00 MHz (50 kHz steps)
Sensitivity
2.5
µ
V (IHF)
S/N 26 dB
2.2
µ
V
Antenna terminal(s)
75
Ω
(unbalanced)
