Panasonic SA-XH201, Service Manual

Page: 29 / 122

29
9.2.2. Setting of Panel Code
This section describes the procedure necessary after replacement with a new Main P.C.B. (Refer to Section 17.1. for the assigned
Main P.C.B. part number).
Step1 : Press [OPEN/CLOSE] button on main unit, follow by [4] and [7] on remote control (To enter into Doctor Mode).
Step2 : Press [CANCEL] button on remote control, then press [2], [2], [8] and [0] on remote control.
Step3 : Key in new panel code using remote control (refer to Figure 9-3).
Step4 : Press [OK] on remote control.
Step5 : Unplug AC power cord.
Step6 : Plug AC power cord.
Step7 : Press [ ] button on main unit.
Step8 : Check panel code (refer to section 9.2.1).
Figure 9-3
Main P.C.B. Part No.
REP4923A REP4923D REP4943A REP4943B
Default Code
661 870 261 422
S
uppor
t
M
ode
l
P
a
n
e
l
Code
XH60GA 360
XH60GS 370
XH60PH
XH60GW
380
361
XH100GA 260
XH100GS 270
XH100GW 261
XH100PH 280
XH160GA 460
XH160GS 470
XH201GW 561
XH300GS 670
XH301GW 661
XH300PH 680
XH330GA 760
XH330GS 770
XH330LJ 790
XH330PH 780
XH380GS 870
XH330GW 761
660
XH370GA